Читать книгу Common Science - Carleton Washburne - Страница 20

Table of Contents

Experiment 12.² Unscrew the bell from a doorbell or a telephone. You will not harm it at all, and you can put it back after the experiment. Cut a sheet of heavy wrapping paper or light-weight cardboard about 5 × 9 inches. Roll this so as to make a cylinder about 5 inches high and as big around as the bell. Hold it in shape by pasting it or putting a couple of rubber bands around it. Cut two strips of paper about an inch wide and 8 inches long; lay these crosswise; lay the bell, round side down, on the center of the cross. Push a paper fastener through the hole in the bell (the kind shown in Figure 14) and through the crossed pieces of paper, spreading the fastener out so as to fasten the paper cross to the rounded side of the bell. Bend the arms of the cross up around the bell and paste them to the sides of the paper cylinder so that the bell makes a curved bottom to the cylinder, as shown in Figure 15.

Footnote 2: To the Teacher. If you have a laboratory, it is well to have this cylinder already made for the use of all classes.