Читать книгу Scientific and practical technomagic - Eugene Shamala - Страница 3

The Rod of Hermes is a technical device made of matter, but working with an intangible substance, with the building material of matter, with the elements that make up the Space-Time Grid, with that proto-substance that we timidly, but already called ether, with its components, which we call graviton and phonon.

If a lot of people thought about the ether, wrote, talked, talked a lot, and a lot when, then about the forms of its dynamics, about its place in the universe, about the universe itself, about the synergistic structure of man, from society, and even about the beginning of Creation – about it is not enough where and, few people told.

And so, in order to fill this gap, one of the Co-Creators (who called himself O’Jan) sent a teaching called «Kalagiya» to Earth. The teaching came in Russian, which means for the Russians. The Teaching was transmitted in a channel way, through the Prophet. The Prophet Alexander Naumkin accepted the teaching. He now lives in the mountains in Altai.

This teaching is unparalleled in power and informativeness. Personally, I understood only a drop of it, and as a result, I got the book that you are reading. Imagine we understand everything. You can move mountains. In short, study and study for many more years.

I constantly refer to this doctrine – and this is normal, it corresponds to today’s realities and accurately describes and answers the necessary questions posed.

Wands of Hermes, several varieties. But in its classic form it looks like this

Here and now we will consider the Rod, which I call «gravitational» – the Gravitational Rod.

The Rod of Hermes is a technical device that allows you to redistribute the density of the gravitons field in space, thereby changing the direction of the gravitational force in the local area.

At the heart of the principle of operation of the device of the Wand is a phenomenon similar to the phenomenon that we call a gas tornado. This is what a gas tornado looks like:

But the dynamics of gas in the atmosphere and the dynamics of aether are different phenomena, and they are similar only in the first approximation. With a more careful approach, differences appear, which then become more and more significant, and, ultimately, in general, any similarity disappears. Only a resemblance remains.

Therefore, let’s start with how «Kalagiya describes the forms of energy movement. This is written in the 21st chapter of the First Section of the Kalagiya:

«one. It has already been said: «The energy potential will correspond to the degree of its compaction. Condensation of energy is carried out by forcing it into one place, with the application of torque.

3. Rotation has two forms of motion – centripetal and centrifugal.

10. Any viable construction is achieved by the movement of a rotating spiral of energy. Condensation of energy, that is, its injection, is carried out in the same way. In general, any life is built by the movement of a rotating spiral: be it energy or a substance that is composed of energy.

If the centripetal movement of the incoming energy directs the Fire to one place, namely to the Channel of the Movement of Fire, which achieves the discharge of the density of Time and the compaction of Matter (Space) by this Fire, then the centrifugal movement of the incoming energy directs the Fire into radial radiation from the Center of its movement, which achieves the injection of density Time and rarefaction of Matter (Space).

11. Thus, during the centripetal movement of energy, Matter (Space) becomes denser, and the density of Time is discharged in the Center of the Movement of Fire. In the Circle of Influence of Energy in this case the Matter (Space) is discharged, and the density of Time is pumped up; beyond the Circle of Influence of Energy Matter (Space) is condensed, and the density of Time is discharged.

12. During the centrifugal movement of energy, Matter (Space) is discharged, and the density of Time is pumped up in the Center of Fire Movement. In the Circle of Influence of Energy in this case the Matter (Space) is condensed, and the density of Time is discharged; beyond the Circumference of Influence of Energy, Matter (Space) is discharged, and the density of Time is pumped up.»

To obtain anti-gravity effects, the Centrifugal type of rotation of Energy is used. So once again:

«During the centrifugal movement of energy, Matter (Space) is discharged, and the density of Time is pumped up in the Center of Fire Movement. In the Circle of Influence of Energy in this case the Matter (Space) is condensed, and the density of Time is discharged; beyond the Circumference of Influence of Energy, Matter (Space) is discharged, and the density of Time is pumped up.»

Ideally, this formula describes an energy torus consisting of two tori inserted into each other.

In this torus, «Kalagiya distinguishes three zones – the Center of the movement of Fire, the Circle of Energy Influence, and beyond the Circle of Energy influence.

In other words, these are the central channel, the inner torus and the outer torus. This composite torus has charge signs corresponding to the density parameters of the Elements that make up the Space-Time Grid.

In the figure you can see where this torus has pluses, and where are the minuses. Therefore, the central channel and the center itself, the focus, where the energy diverges radially, is charged with a minus. The inner torus, also known as the Circle of Influence of Energy, is charged with a plus. And the outer surface, which is, as it were, a continuation of the central channel, is charged with a minus. We will supply the energy for the launch both to the Central Channel and to the Circle of Energy Influence. The outer surface receives energy from the center.

Why is there a minus, but here is a plus – don’t ask – this is the result of experiments and research.

Now a very important point. Each zone of the energy torus consists of two components – either Space is condensed, and Time is discharged, or Time is condensed, and Space is discharged. And each configuration has its own charge sign.

Space becomes denser, and Time is discharged – this is a plus.

Time is compacted, and Space is discharged – this is a minus.

Then let us clarify that the discharged Time is charged with plus, the condensed Space is charged with plus.

Condensed Time is charged with a minus, Discharged Space is charged with a minus.

We got two pluses and two minuses. Let’s clarify and look at the graphics of the energy tori pattern. To the compacted minus of Time we will add a rarefied minus of Space, and to the compacted plus of Space we will add a rarefied minus of Time.

Gravitons are responsible for Time, and phonons are responsible for Space.

Then, if we condense gravitons, this is a minus. Discharging phonons is also a minus.

And vice versa: we discharge gravitons – this is a plus. We condense phonons – this is also a plus.

And now we come to a very important fact – it turns out that the charge by its nature is not one. There is a graviton charge, and there is a phonon charge.

Then you need to give an approximate formulation of the concept of charge. A charge is a change in the density of the ethereal field in some point local area of the Space in the direction of decreasing or increasing from some initial, «zero» level of this value.

The ethereal field, ether consists of two components, two components of its ethereal substance – gravitons and phonons.

Gravitons and phonons in the first, most primitive definition are energy carriers. Gravitons are carriers of kinetic energy. Phonons are carriers of thermal energy.

Gravitons are responsible for the manifestation of all types of mechanical energy. Including the pressure gradient in the graviton field creates the formation of conditions for such a phenomenon as gravity. Any manifestation of mechanical force can be described as the impact of high-frequency pulses of graviton substance

Graviton is a particle of toroidal shape, filled with energy, which looks like pure Light, like Radiance, like Radiance

The phonon is responsible for the manifestation of all types of thermal energy. All thermodynamics is phonons.

Phonons are filled with energy that looks like Fire and is felt by the senses as a manifestation of a phenomenon called Temperature.

The form of a phonon is the same as that of a graviton – it is a torus, but filled with Fire.

Both the phonon and the graviton can straighten out into the form of a cylindrical spiral, and interacting with each other, provide the manifestation of some other physical phenomena.

For example, from straightened gravitons and phonons, and inserted into each other, the grid of Space-Time is woven, woven.

Or, for example, atoms consist of focused, concentrated phonons and gravitons that form the atomic nucleus and outer shell.

Then the atom can be considered as a corpuscle, as a cavity filled with Fire and Light.

But back to our charges. The charge, as we explained above, manifests itself if the energy density in the ether field increases or decreases locally. But since this field is of a double binary nature, then the charge also has a double binary nature.

In general, it must be said that the whole Universe is based on a binary principle. This is the foundation, this is the pinnacle, this is the quintessence of the entire world order. This is when one whole, without fail, consists and manifests itself in the form of its two components. Two component. Two links. Two halves.

The most remarkable property of binary systems is the manifestation of the Synergy of interaction – this is when each link of the binary system individually does not represent anything special, but when these links are connected, when they interact within the binary system, additional interaction energy is released, called Synergy.

The total energy of synergistic, including binary systems, is always greater than the arithmetic sum of the energies that make up the system, but work, manifesting themselves separately.

And only when the links of the binary system interact, its remarkable property is manifested – to release additional, some kind of internal energy. Where does she come from? Yes, from gravitons and phonons. Their internal energy is huge, but we must learn how to release and use this energy.

And this happens, as a rule, when some of the ether components are compacted – or gravitons, or phonons, or both together. As it is said in «Kalagia»: «… when energy is pumped into one place when a torque is applied.». And this is nothing but a spiral funnel – a spiral vortex of energy.

So we know that charge can be positive or negative. Now we know that the charge can also have a different nature – both phonon and graviton.

Tribocharge has a graviton nature – the charge obtained by friction. This charge manifests itself when exposed to the atomic shell. Three – we get a charge. We increase the density of gravitons – there will be a minus. And in the place where these gravitons were taken from, their deficiency turned out, the rarefaction of gravitons will be a plus.

The phonon nature has a piezo charge, – the charge received by the action on the atomic nucleus. We put pressure on the piezoelectric element, act on the nucleus of the atom – we get a charge. We extrude phonons onto the surface on one side of the crystal, increase their density in this place – we get a plus in this place. At the opposite end, respectively, there will be a minus. On the one hand, the atom pushes out phonons, but on the opposite side, to restore the energy balance in the nucleus, it draws in these phonons. And this is all the second type of charge.

Now everything seems to be collected to the heap, all the components are there. Now you just need to take these charges and make them move along the trajectories that we showed for the Centrifugal type of energy movement.

The ultimate goal is to solve the problem of pumping gravitons to one point, to a certain focus, so that when these gravitons are compacted, to force these gravitons to release the energy of Light contained within them, which, by its local presence, increases the energy density in this local zone, forming a pressure gradient, pointing outward from the focal point. And then the phenomenon of mechanical expulsion will be observed from the focus point, which can be interpreted as antigravitational repulsion.

And if this phenomenon is formed with the help of a certain generator, then the generator itself will be pushed out from this point. We obtain a solution to the «Baron Munchausen» problem.

Such a generator, if it is properly manufactured, connected to power and used, is the Rod of Hermes.

What do we see? The central trunk, which corresponds to the central channel of the image of the diagram of energy moving centrifugally.

Spiral snakes are elements of the device that form an energy torus, prescribed by Kalagia when describing centrifugally moving energy as a «Circle of Influence of Energy».

A ball is a structural element that separates the energy flows of the Circle of Influence of Energy and the funnel of the energy flow entering the Central Channel.

Beyond the Circle of Influence of Energy, we do not exert any energy impact – everything happens autonomously, if, of course, everything is done correctly.

Now knowing that the nature of the charge can be of two types, we understand that the power of the elements of the Rod structure must also be carried out from two sources of energy that produce charges of a different nature.

But before that, you need to deal with the question: «What is it – the movement of energy?»

The term «Electric Current» immediately comes to mind. It’s not just a term – it’s an attitude – it’s a wedge driven into our heads. We absorbed this, one might say, with mother’s milk, from the school bench. We don’t doubt it. Nobody doubts.

Ask what an electric current is, and in response, thousands of voices will sing: «Electric current is a flow of charged particles inside a conductor.» In wires, this is a flow of electrons; in liquids and gases, this is a flow of ions. Everything! The beauty!

And just try to respond. They will spread far and wide. They will tear it into a small one, into a vest.

There are no streams of charged particles in conductors in the event of such a phenomenon, which we call electric current – this stream does not exist.

But then the question is: «What is it then? What carries energy? If you stick your fingers into the socket, you will immediately understand – this is energy? What then carries this energy, if these are not charged particles?

The answer is that energy in electrical circuits, with the manifestation of factors that we call electrodynamics, is transferred by longitudinal density waves that arise between atomic bonds in the crystal lattice.

If the substance of the material is capable of forming these waves inside its crystal lattice, we call such a material a conductor.

In liquids and gases – there are real ions, there is a real flow of particles of matter. But we will not touch on this. We are interested in electrodynamics. These longitudinal waves of energy look like this:

What is a wave? Let’s take the course of the school (approximately) … A wave is an ordered process of oscillation of particles forming a wave near the equilibrium position. What can a wave do? A wave, and this is the main thing, can carry energy. And since there is energy transfer, it means that the wave can exert pressure, affecting the energy density of this wave.

Yes, the wave carries energy, but the wave does not carry any particles. Oscillation of these particles «back and forth» near the equilibrium point, this wave forms, but does not transfer anything anywhere. This means that there is no current of particles and cannot be.

In this case, the circuit must be closed. And the phenomena that accompany the wave transfer of energy inside the conductor, which we know as magnetic and electric fields, are also only wave processes, but of a more complex nature and form, about which we still know little. These wave processes can also transfer energy, but these waves do not transfer any substance, some substance.

A longitudinal wave in a conductor, which we perceive as an electric current, propagates along interatomic bonds, interatomic threads formed from gravitons and phonons, opened into longitudinal cylindrical spirals, and lined up «at the back of the head» to each other.

Then, in these longitudinal cylindrical interatomic spirals, somewhat reminiscent of springs, during the formation of a longitudinal wave, zones of densification and rarefaction will form. And this is nothing but a manifestation of charges. Each element of a longitudinal wave, each of its period, formed by compression and rarefaction, has a minimum charge. That is why the energy flow of a longitudinal wave can be identified by us as a flow of charges. And it is right. But this is not a stream of particles, it is only a stream of an energy density wave.

I am telling all this in order to explain that with the help of electrodynamic phenomena, it is impossible to obtain any over-unit phenomena of the manifestation of additional energy.

In order to receive this additional energy, its, this energy, you must first release their ethereal particles, creating the necessary conditions for this. And the most important of these necessary conditions is the densification of the ethereal substance.

But this ethereal substance can be condensed only if this substance is introduced, plunged into a real dynamic process. In our case, we need a process of helical injection, helical dynamic pumping. But in any case, this is a dynamic process, in contrast to the wave processes occurring in electrical circuits.

That’s why we need a generator that could provide this dynamic process – form and support.

For this we will use electrostatic generators.

In general, the term «electrostatic generator» is very deafening. What is electrostatics? This is a branch of the science of physics that studies motionless, static charges. And what do we know here? We know Coulomb’s law, we know a couple of formulas, we know that an electron has the smallest charge, and we know the numerical value of this minimum charge. And that is all!!!

Giant knowledge! We also know the value of the minimum «zero» level of the density of the ethereal substance. This value is a parameter that we call «Electrical Constant». Did you know it? That’s it… Meanwhile, in English this constant is called «Vacuum Density Constant». Did you know it? O!

And all this applies only to stationary charges – this is real electrostatics.

About real electrodynamics – about real dynamics, about the real movement of charges, we know nothing. From the word «absolutely». But it is real electrodynamics that is the door behind which there is a path to unlimited energy.

Meanwhile, before our ancestors knew about it incomparably more. Just knowledge destroyed. Concepts and definitions have been replaced and replaced. Brainwashed with various theories like «Theory of Relativity». We put on an industrial basis a technique for withdrawing various achievements in this area through the use of patent offices. Organized en masse the work of various committees for the «Combating Pseudoscience» for public and wide condemnation, ridicule, defamation and criticism of both researchers and all sorts of attempts by these researchers to get to this closed knowledge.

You won’t find any information on the net. Everything is in the archives. Something in the libraries.

I found something on the net and was amazed at what scientists were doing at the beginning of the 20th century. Electrostatics is represented by various types of generators, for example. Electrostatic transformers, for example, have nothing in common in design, they have nothing in common with electrical transformers. That’s right, some little things. The question is, why was it necessary?

Nothing… Let’s figure it out… We return to our sheep.

To obtain dynamic processes, which we will call aether dynamics, we need special generators.

We know them. These are electrical generators. These are Tribogenerators. These are piezo generators. There are also nuclear ones, but this is not about us, ordinary people.

Tribostatic generator. This is a Van der Graf generator. mechanical type. Simple. The stationary Brush rubs against the moving conveyor belt, charges are generated and these charges are transferred to the terminal in the form of a metal ball. Variety – pellet generator. In addition, the principle of electrostatic induction is applied.

Piezogenerator. It is mainly used to ignite various types of lighters, to ignite all kinds of burners.

Electrophore generator. This is the most important generator. Overriding. I myself only recently got to the bottom of its true purpose. Although I have been using it for more than one year, the truth has only now been revealed, although it has always been on the surface. We will talk about him.

An electrophore generator, or an electrofork, is an electrical machine designed to multiply a charge, separate it and distribute it to capacitors.

An electric fork, in itself, does not have its own charge, but it can multiply in large quantities and in a short period of time a charge brought from outside.

I remember when I bought it, unpacked it, twisted the handle – damn it, it doesn’t work. Get online and ask. It turned out that you first need to put the initial charge on the disk. Or a comb, or a newspaper between the disks to insert and spin – I did, and the machine started working.

Here is the electric machine. Works, in this case, with a tribocharge. A tribocharge is a graviton charge, where the negative charge is active.

We turn the handle. The generation has gone. How the generation itself takes place on the basis of the law of electrostatic induction, I will not describe the mechanics itself. Explore for yourself.

So, the generation started. What’s happening? Where do gravitons come from? They come from a jar – from a Leiden jar – a condenser. They, these gravitons are pulled out of one jar and transferred to the second jar. On the inner lining of this jar. Accordingly, an excess of gravitons appears on the inner lining, and the bank is negatively charged. In the first jar, from where gravitons are drawn out, the density of gravitons decreases and the jar becomes positively charged. On the outer plates, connected by a metal bridge, there is a flow from the lining of one can to another, and the outer plates are charged with opposite signs. This is necessary to maintain the energy balance – the total energy density in the banks remains at the same level. And we turn the handle.

If we stopped, then we would have two capacitors filled with a charge up to some nominal value. If we want to release the capacitors, drain the charges, we simply bring the spark gap balls together, there is a sharp flow from the area with high pressure to the area of low pressure with the release of a certain amount of Fire and Light, which immediately go into a bound state in the phonon-gravitonic ethereal field.

But we keep turning the knob. The capacitors are overfilled, but generation, due to the specifics of the electroforking device, continues. Where are the gravitons from?

Yes, from space. The arrester balls are far apart, or removed altogether. Then, with the help of one collector, where is plus, gravitons are pulled out of Space. More precisely, from the inter-thread space of the Space-Time Grid. They are pulled out and transferred with the help of a disk to the second collector. And then it is simply thrown out of it, in the same way, into the surrounding Space.

During this period, the graviton flow moves along the conductive elements of both collectors, the pulsation of which, moreover, is smoothed out with the help of receiver-capacitors. From one point of space we take, to another we transfer. The pressure difference that can allegedly be formed is immediately equalized. It’s like taking buckets of water from one corner of the pool and transferring it to another corner, trying to redistribute the density of the liquid in different corners in one pool.

If we attach wires to the ends of the collectors, continuing to turn the knob, a flow of gravitons will flow through these wires from the end of one wire to the end of the other, and the capacitors will smooth out the ripple.

This is how real electrodynamics is obtained – the movement of the flow of charges through the body of the conductor. One end will then have a negative potential sign – it can be injected or compacted from it. The second end will have a positive potential sign. From it we get rarefaction, pulling out charges, reducing the density of the graviton component of the ether.

And since it is this ethereal component that is «responsible» for such a part of the Space-Time Grid as Time, and it is gravitons that are responsible for the same section of information transfer, then in the definitions of «Kalagia» we are talking about such parameters as Density and Rarefaction of Time.

Time is condensed, pumped – minus. Time is being discharged, density is being drawn out – a plus.

We figured out two parameters, but there are two more – Density and Rarefaction of Space. But this is another type of electrostatics – piezoelectrostatics. The piezo charge generator looks like this

One lighter at the end, when pressed, gives out a minus, the second – a plus. At first I just tried to charge the capacitor with these lighters. It turned out that this had to be done «until death», and then you will not achieve the result. And how will the flow of the piezo charge in the conductor be ensured? And then came the revelation…