Читать книгу Chats on Household Curios - Fred. W. Burgess - Страница 13

Table of Contents

Fire brasses or fireirons came into vogue with grates, although the sets now regarded as old fire brasses, some of which are very elaborate and massive, made at the beginning of the nineteenth century, were first used when fenders came into vogue; instead of being reared up alongside the fire-dogs in the chimney corner they rested on the fenders. There is not much to distinguish the variations in fireirons except the obvious indications of older workmanship and design, when contrasted with modern "irons." The shovel pans gave the artist in metal some opportunity for showing his skill in design and perforated work. It is probable that the earliest form of shovel was that known as the "slide," its use being to shovel up the ashes of a wood fire, an operation necessary more frequently then than in modern days when coal has been the principal fuel consumed. Some of the older specimens are dated, and bear the owner's initials; thus one authentic specimen from Shopnoller, in the Quantock Hills, is engraved, "I T. 1784." Many of the Dutch metal workers produced very beautiful and decorative stands on which miniature sets of rich brasses were hung; some of the old English fireside stands were arranged as receptacles for tongs, shovel, and brush, and now and then the baluster stem supported by a tripod base had a central attachment from which a toddy kettle could be slung. The brass toddy kettle formerly stood upon the hob of the grate, singing merrily, always ready for the cup of tea which "cheers but not inebriates," or, as was frequently the case, for the preparation of hot toddy or spirit.

The evolution of the fender forms a pleasing story in connection with the ingle side. Perhaps the earlier form likely to interest collectors of household curios is that made of perforated brass, often some 8 in. or 10 in. in depth. These fenders standing on claw feet were afterwards fitted with bottom plates of iron, on which was a ridge or rest against which the fire brasses were prevented from slipping. Then came iron or steel scroll-shaped fenders, tapering down from a few inches in height at the ends to centres almost level with the ground. To obviate the inconvenience of there being no resting-place for the fireirons loose supports were fitted into sockets at the ends, and these afterwards were cast as part of the scroll. Then came the stiff and formal early Victorian metal work—iron fenders with steel tops relieved occasionally by ormolu ornament. These in their turn gave way to fender kerbs of metal, stone, marble, or tiles, and loose ornamented fire-dogs which have in more recent times served as rests for the fire brasses.

FIG. 13.—FINE CARVED WALNUT WOOD BELLOWS. (In the Victoria and Albert Museum.)