Читать книгу Arms and Armor of the Pilgrims, 1620-1692 - Harold L. Peterson - Страница 3

Table of Contents

Of all the pieces of defensive armor, the most popular was the helmet. Almost everyone wore one when he prepared for trouble. Most of those worn at Plymouth were undoubtedly open helmets which left the face uncovered, although it is possible that a few completely closed helmets were also used. These open helmets were of three principal types: the cabasset, the morion, and the burgonet. The cabasset was a simple, narrow brimmed helmet with a keeled bowl and a tiny apical peak pointing to the rear. The morion had a larger crescentic brim pointed at the front and back and a high comb along the center-line of the bowl. The better specimens of both these helmets were forged from a single billet of steel, and both were very efficient defenses. The curving lines of the bowls caused most blows to glance off without imparting their full impact, and the comb of the morion presented an extra buffer of metal through which a sword would have to cut before it reached the bowl. Inside each helmet was a quilted lining held in place by a row of rivets around the base of the crown which acted much like the modern helmet liner in holding the steel shell away from the wearer’s head.

Cabasset.

Morion.

The burgonet was a slightly more complicated helmet than the morion or cabasset, and it was made in a variety of styles. Basically, it was an open-faced helmet which covered more of the head than the other two. Usually it had a peak or umbril somewhat like the visor of a modern cap over the eyes, a comb on the bowl, and movable plates to protect the cheeks and ears. Often there was a defense for the face in the form of a single adjustable bar which passed through a hole in the umbril or by three bars fashioned like a muzzle and attached to the umbril which was pivoted at the sides so it could be raised or lowered. One form of the burgonet which became popular in the second quarter of the 17th century was known as the lobster tail burgonet because the wearer’s neck was protected by a series of overlapping plates which somewhat resembled those on a lobster’s abdomen or “tail.”

A fourth and final type of helmet was known as a “pikeman’s pot.” This greatly resembled the morion, but had a broad flat brim instead of a narrow crescentic one. As its name indicates, it was worn primarily by pikemen in conjunction with a specific type of corselet which was generally designated pikeman’s armor.

This armor consisted of five elements in addition to the helmet. There was a gorget to protect the neck and to support the weight of a back plate and a breastplate which were fastened together by straps which passed over the shoulders and attached by hooks at the front and by a belt that passed around the waist. At the lower edge of the breastplate were fastened two hinged plates called tassets which protected the thighs. Although each of these plates was made from a single sheet of metal they were embossed to resemble a series of overlapping plates, complete with false rivets.

Of all the forms of body armor worn in America during the early 1600’s, the pikeman’s suit was undoubtedly the most popular. There are numerous references to it in the contemporary documents. A tasset from such a suit was found behind the fireplace in the John Howland house near Plymouth and is now preserved in Pilgrim Hall. In the Massachusetts Historical Society in Boston there are a helmet, a back plate and a tasset from another suit which belonged to an early colonist, and portions of similar suits have been found in Pennsylvania and at Jamestown, Virginia.

Men armed with muskets might sometimes wear pikeman’s armor, but more often they wore simpler corselets consisting only of breast and back-plates. With these corselets they wore either a cabasset, a morion or a burgonet.

The weight of the corselets worn by the Pilgrims depended largely on the quality of the breastplate. The helmets and other pieces were sufficient to stop a sword blow or turn an Indian’s arrow but still quite light. Breastplates, however, were made according to three standards depending on what weapons they were supposed to offer protection against. The lightest forms were labeled pike proof or high pike proof; the next heavier were called pistol proof, and the heaviest were musket proof. The musket proof breastplates are quite scarce. Often they are ⅜ of an inch thick and bear a dent caused by a bullet fired at them as a test when they were made. Pistol proof plates are much lighter and are much more plentiful. They also often bear a testing dent and sometimes the letter “P” as a proof mark.

Burgonet

Lobstertail burgonet.

Most modern Americans tend to think of armor in terms of brightly polished steel. Sometimes it was finished bright, but by the 17th century it was more often black, brown, or dark blue. This was especially true of those suits destined for active service in the field. A brightly polished piece of armor needed constant care to guard it from rust and maintain a good appearance. Blacking, russeting or bluing it helped protect it and made it easier to maintain. The black finishes were sometimes obtained through the use of soot and oil, sometimes by paint. The russet and blue finishes were produced by artificial oxidation.

English pikeman’s armor bearing the cypher of James I (1603-1625). The waist belt is now missing.

Simple corselet with a bullet proof breastplate.

This defensive armor, though popular at first, was soon discarded by the Pilgrims. The men who set out on the first exploring expedition when the Mayflower touched at Cape Cod were all armed with corselets. They found them efficient protection against the arrows of the Indians, but when they at length discovered a quantity of Indian corn, they were so encumbered and weary from the weight of their arms that they could not carry back as much of the booty as they desired. Soon they found that they could usually dodge arrows unless taken by surprise, and so gradually they began to decide in favor of freer movement and less weight. The corselet retained its popularity for the first ten years, but a compromise in the form of a heavy buff leather or quilted coat began to make its appearance. By the time of the Pequot War in 1637, the presence of “unarmed” men, as those without armor were called, became more and more frequent. The helmet was the last piece of plate armor to be discarded, but following King Philip’s War (1675-1678) that too was abandoned, and plate armor disappeared from the scene except for ceremonial occasions.

Capt. Miles Standish’s rapier and scabbard.