Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 20

Detail Strip:

3. The extractor and its coil spring are retained in the slide by a vertical roll-pin. If removal is necessary, use a proper roll-pin punch. The dovetail-mounted rear sight can be drifted out.

4. Fully depressing the firing pin safety block will release the firing pin for removal.

5. After the firing pin is taken out, the safety block and its coil spring can be removed. A hooked tool can be used to extract the firing pin rebound spring.

6. Remove the screw and take off the right grip panel. CAUTION:The trigger spring may be released. Detach and remove the combination trigger and trigger bar spring.

7. Remove the trigger bar.

8. If necessary for repair, drift out the trigger pin and turn the trigger into the guard space for removal. The two pins above the trigger space are not removed in normal takedown.

9. Remove the screw and take off the left grip panel. Restrain the magazine catch, and drift out the catch cross-pin. CAUTION:Control the magazine catch as the drift punch is taken out. Note that the pin is a splined type, and must be drifted out toward the left.

10. Ease the magazine catch outward, and remove it.

11. Remove the combination magazine catch and hammer spring.

12. Drift out the hammer cross-pin.

13. Remove the hammer, ejector, and firing pin block safety lever upward.

14. If necessary for repair, the hammer strut can be removed by drifting out the cross-pin.

15. The takedown latch detent ball and its powerful coil spring are staked in place. This system is not removed in normal disassembly.