Читать книгу Life and Science. The speed of light. World broadcast. Time Machine. Morphogenetic fields. Replication of objects. Unsupported movement - Rem Word, Rem Wоrd - Страница 9

Michelson-Morley interferometer. 1. Light source 2. Screen for observing the interference pattern. 3. Beam reflected perpendicular to the interferometer arm and deflected by the ether flow to the left. 4. A ray emitted towards the stream of ether and therefore participates in the construction of an interference picture. 5. Beam reflected from the mirror of the interferometer arm, presumably directed along the ether stream. Figure above. Author’s experience with laser beam deflection. 1. Laser. 2. Laser beam at 9 am. 3. Beam at 17 o’clock. The angle is increased for clarity. 4. Place the mark on the screen at 9 o’clock. 5. Mark at 17 o’clock. The screen and the laser are separated by 90 m. The difference in the position of the beam on the screen, over five days, is 3 cm.

…Does ether exist, this kind of ocean in which light waves roll? And, as we assume, keeping the shadows of the past quite fresh, forever? Let’s bring a revision of physics. Michelson-Morley interferometer. The beam is divided by a translucent mirror. One of them goes towards the stream of ether, then back. Its speed changes. The second is perpendicular to the flow and therefore serves as a standard of speed. If the speeds do not match, the interference pattern will change. In the figure below on the left, the author imagines that the position that the rays pass strictly perpendicular paths is incorrect. During the stroke along the arms of the interferometer, the rays are deflected by the ether stream. The detector receives waves initially deflected towards the ether stream. The scheme for constructing a real interference pattern is much more complicated than Michelson’s drawings. In addition, according to the reasoning about the Mössbauer effect, only light with a “standard C” speed of 300,000 km is clearly observed. from. Figure above the interferometer. The author’s experience. The deflection of the laser beam, presumably due to entrainment by the ether. If the ether is carried away by light, with the specified parameters, the flow velocity of the medium is 100 km. from. This value is in good agreement with the speed of the Earth’s revolution around the center of the Galaxy, 200—220 km. with.. Why didn’t you notice earlier? When operating laser communication systems, the system is “zeroed” automatically or manually. This rule is considered the norm. A more plausible explanation. During the day, the air in the room where the experiments are carried out warms up. The air lens distorts the beam.

An Interferometer for the Poor. And it’s not even an interferometer

…Several years later, I decide to repeat this experience. The deviation of the beam obtained in the preliminary sample is large enough to try to create an “interferometer for the poor”, with the ability to change the direction of scanning the ether manually. On a massive bar, parallel mirrors and a laser sight are placed. The length of the beam reflected twice is 6.5 meters. It is inconvenient to turn the device and observe the change in the position of the beam at the same time. To record the results, an electronic camera rigidly fixed on a bar (not shown) is used.

…First, we reproduce a stationary experiment. We send the beam not to the lens, but to the laboratory wall. This increases the length of the light path to 10 meters. It all fits together. After 5 hours, the light spot shows a new position, 4 millimeters below. It is alarming that after a day, that is, the Earth’s rotation around the axis, it does not return to its original mark.

We pass to independent turns of the “interferometer”, without the help of the planet.

The brightness of the laser light changes when the device is turned

The action takes place late in the evening. The first picture, a scan of continuous video filming – the beam comes from the East (although it changes direction twice more, reflecting from the mirrors). The above images do not show the mesh imposed by the Point editor. However, I see that the vertical line formed by the beam in interaction is likely to shift with the optics of the camera. From the series of scans, for demonstration in the book, we select the most characteristic ones. East, North-East, West, East again. The beam takes on the greatest brightness when oriented to the West. The only reliable, well reproducible result that is not ashamed to present to you, dear reader, is the brightness of the glow.

We can exclude mirrors from the experiment and get a kind of elementary optical pair. The beam only goes in one direction. The result is the same.

…Indeed, propagating against the ether, or along the flow, the light accordingly loses and gains energy. Changing the direction of the beam is more difficult. Although it also exists.

Two similar outdoor experiences. Determination of beam deflection (brightness is not considered due to external uneven illumination). Directions – North, East, South, West, origin – North

…We go out into the fresh air and continue our experiments. Some researchers believe that the ether can be slowed down, and completely brought into a state of relative rest, by such an obstacle as a simple window glass.

The result is the same in both cases. Within a few minutes after switching on, the laser beam goes down by 1, 5 – 2 millimeters.

…All this, coupled with the oddities of the device settings, which would take too long to talk about here, leads to the idea that one should look for the reasons elsewhere. To do this, you need to take a step aside.