Читать книгу Electronics For Kids For Dummies - Shamieh Cathleen - Страница 4

To build the projects in this book, you need to buy a bunch of electronic components (including resistors, capacitors, diodes, LEDs, transistors, and integrated circuits), accessories (such as alligator clips and wires), tools (such as wire strippers), and other supplies.

Plan Your Shopping Spree

I wish I could name a store in a shopping mall close to your house where you could just walk in, pick out all the parts you need, plunk down about $100, and go home and start building projects. Unfortunately, there is no such store (even RadioShack stores no longer carry a wide variety of electronic components).

So, you will need to order many of your supplies online, which means you have to plan to allow time for shipping. The good news is that you can save a lot of money by shopping online, and you can get most of the components you need in just one online trip (with an adult’s assistance or, at least, an adult’s credit card). You may still need to go to a couple of local stores to pick up some tools and other supplies.

Here are some recommended suppliers:

✓ Tayda Electronics: With warehouses in Colorado (US) and Bangkok (Thailand), Tayda ships worldwide. Allow 1–4 weeks for delivery, depending on where you live. The website, www.taydaelectronics.com, is easy to use. One visit to Tayda and you can order every electronic component and some of the accessories you need at reasonable prices (many for just pennies). I’ve provided Tayda part numbers for many of the components you need in the next section.

✓ Fry’s Electronics: Between its stores (in several US states) and website (www.frys.com), Fry’s stocks many of the electronic components and accessories you need. Fry’s ships worldwide.

✓ Farnell element14: Start at www.farnell.com and select your country for the Farnell element14 company in your region. (The US company is branded Newark.) You’ll find all the electronic components and many accessories you need. The website is geared toward industrial customers, so be prepared for highly technical product descriptions.

✓ RadioShack: RadioShack’s online (www.radioshack.com) and in-store stock of electronic components seems to be dwindling, but if you really need a certain component right away, and your local store (US only) has it, it’s worth the trip. Expect to pay significantly more at RadioShack than at other online suppliers.

You can also find most (or all) of the components, accessories, tools, and supplies you need on www.amazon.com or www.ebay.com. However, the product information is often spotty, so be sure you know exactly what you’re ordering and be aware of shipping prices and delivery time frames.

Budget

If you’re a smart shopper and order online, you can purchase all the electronic components and accessories you need for roughly $70 plus tax and shipping. (Of that $70, $20 is for two parts you need for Project 14, one of which is optional.) You may spend about another $30 (plus tax) on tools at local stores, if your family doesn’t already have what you need. If you buy a lot of your components and supplies in a RadioShack store, budget another $25 or so.

Electronic Components and Accessories

This section provides a comprehensive list of the electronic components and related parts you need to complete the projects in this book. In the list that follows, I sometimes specify a product code (identified by #) and price (as of this writing, in January 2016) to give you an idea of what to look for and roughly how much you should expect to pay. Here’s your shopping list of electronic parts, most of which are shown in Figure 1-1:

✓ Batteries and accessories:

• One (minimum) fresh 9-volt disposable (not rechargeable) alkaline battery ($2.50–$5.00).

• One 9-volt battery clip (sometimes called a snap connector). Tayda Electronics #A-656 ($0.10), RadioShack #2700325 ($2.99), or similar.

✓ Wire, alligator clips, and switches:

• Assorted precut, prestripped jumper wires (optional but highly recommended). Newark #10R0135 ($3.50), Newark #10R0134 ($6.00), RadioShack #2760173 ($7.00), or similar.

• 22-gauge solid wire, insulated, 15–25 feet (you only need 15 feet of wire if you purchase precut jumper wires). Multiple colors are preferable but not necessary. Tayda Electronics sells black (#A-4994), white (#A-4995), red (#A-4996), yellow (#A-4997), green (#A-4998), and blue (#A-4999) for $0.10 per foot.

• Alligator clips, fully insulated. Get 1 set of 10, preferably in assorted colors. RadioShack #2700378 (1 1/4-inch mini clips) or #2700356 (2-inch clips) or similar ($2.50–$3.50 per set). Also check online at Walmart, Amazon, or eBay.

• Alligator clip jumper wires (also called test leads). Get 1 set of 10. Tayda Electronics #A-2373 ($2.46) or similar.

• Two (minimum) 3-pin single-pole, double-throw (SPDT) slide switches. Make sure these switches are breadboard friendly with pins spaced 0.1 inch (2.54 mm) apart. Banana Robotics #BR010115 (5-pack for $0.99), Tayda Electronics #A-5102 ($0.78 each). Or look on Amazon.com or eBay for the 50-pack Amico #610256339894 (roughly $4.00).

• Eight 4-pin mini pushbutton (momentary-on, normally open) switches (also called tactile switches). Tayda Electronics #A-5127 or #A-5126 ($0.04 each) or similar.

✓ Resistors: You’ll need an assortment of resistor values. Look for carbon film resistors rated at 1/4 watt (W) (or more) with a tolerance of 20 percent (or less).

Tayda Electronics sells individual resistors for just pennies each. Select RadioShack stores offer a variety pack (#2710312, $14.49), which contains 500 assorted 1/4 W resistors with 5 % tolerance and includes all the values listed next.

Listed next are the resistor values, the color codes used to identify them, and the minimum quantities you need. Note that Ω is the symbol for ohms, the unit of measure for resistance. I recommend you get at least one extra of each of these values:

• One 10 Ω (brown-black-black)

• One 47 Ω (yellow-violet-black)

• Five 100 Ω (brown-black-brown)

• One 220 Ω (red-red-brown)

• One 330 Ω (orange-orange-brown)

• Two 470 Ω (yellow-violet-brown)

• One 820 Ω (grey-red-brown)

• Two 1 kΩ (brown-black-red)

• One 1.2 kΩ (brown-red-red)

• Two 1.8 kΩ (brown-grey-red)

• Two 2.2 kΩ (red-red-red)

• One 2.7 kΩ (red-violet-red)

• One 3 kΩ (orange-black-red)

• One 3.9 kΩ (orange-white-red)

• One 5.1 kΩ (green-brown-red)

• One 10 kΩ (brown-black-orange)

• One 22 kΩ (red-red-orange)

• One 47 kΩ (yellow-violet-orange)

• One 100 kΩ (brown-black-yellow)

• One 470 kΩ (yellow-violet-yellow)

• One 1 MΩ (brown-black-green)

• Optional: 1 4.7 MΩ (yellow-violet-green)

✓ Potentiometers (variable resistors):

Tayda Electronics has each value you need for just $0.50. Expect to spend $3.49 each if you purchase potentiometers at RadioShack stores. You need these rotary potentiometers:

• One 10 kΩ (linear taper). Tayda Electronics #A-1982 or similar.

• One 100 kΩ (linear taper). Tayda Electronics #A-1984 or similar.

• One 100 kΩ (audio/logarithmic taper). Tayda Electronics #A-1956 or similar.

• One 500 kΩ or 1 MΩ (linear taper). Tayda Electronics #A-1985 or #A-1658 or similar.

✓ Capacitors: When you buy the capacitors in the following list, it’s important to look for a voltage rating of 16 volts (V) or higher. Prices range from roughly $0.01 to $1.49 each, depending on the size and supplier. Tayda Electronics sells each value for just pennies. Always order at least one extra, especially electrolytic capacitors. Note in the following list that F is the abbreviation for farads, the unit of measure for capacitance:

• One 2200 pF (which is 2.2 nF or 0.0022 μF) ceramic disc

• Two 0.01 μF Mylar (polyester) film

• One 0.047 μF ceramic disc

• One 0.1 μF Mylar (polyester) film

• One 4.7 μF electrolytic

• Two 10 μF electrolytic

• One 22 μF electrolytic

• One 47 μF electrolytic

• One 220 μF electrolytic

• One 470 μF electrolytic

• Optional: One 100 μF electrolytic

✓ LEDs and other diodes: Minimum quantities are specified in the following list, but I recommend you purchase at least a few more of each. (They’re cheap – and they’re fryable.)

• Ten diffused light-emitting diodes (LEDs), any size (3 mm or 5 mm recommended), any color. Buy at least one red, one yellow, and one green for the traffic light circuit in Project 13. Tayda Electronics sells 5 mm LEDs for $0.03 each in green (#A-1553), red (#A-1554), and yellow (#A-1555), as well as other colors and sizes for a few pennies each. (I suggest you buy ten red, ten yellow, and ten green.)

• Eight ultrabright clear LEDs, 5 mm, white. Tayda Electronics #A-408 ($0.05 each).

• Ten 1N4148 or 1N914 small signal diodes. Tayda Electronics #A-157 ($0.01 each) or #A-615 ($0.03 each).

• One 1N34/1N34A germanium diode. Tayda Electronics #A-1716 ($0.24).

✓ Transistors: Buy one or two more than the minimum specified quantity of each type, just in case you fry one. They cost pennies each online, or $1.49 each in RadioShack stores.

• Two 2N3904 general-purpose NPN bipolar transistors. Tayda Electronics #A-111 ($0.02).

• One 2N3906 general-purpose PNP bipolar transistor. Tayda Electronics #A-117 ($0.02).

✓ Integrated circuits (ICs):

• Two 555 timers (8-pin DIP). Splurge and buy four or five! Tayda Electronics #A-249 ($0.13 each).

• One LM386 audio power amplifier (8-pin DIP). Get two because they’re so cheap. Tayda Electronics #A-206 ($0.23).

• One 4017 CMOS decade counter. Buy at least two because these chips are sensitive to static discharge. Tayda Electronics #A-020 ($0.30 each).

✓ Miscellaneous:

• One 8 Ω, 0.5 W speaker. Tayda Electronics #A-4140 ($1.28), RadioShack #2730092 ($3.99), or similar.

• One or more light-dependent resistor (LDR, or photoresistor). (any value). Tayda Electronics #A-1528 ($0.24) or similar.

• One spool (at least 50 feet) of 24 gauge (AWG) magnet wire. You need this expensive item if you choose to build the radio in Project 14. Temco #MW0190 or similar. ($6.00–$15.00 online at Amazon or eBay.)

• (Optional) One cheap ($10.00 or less) 3.5 mm audio headset. This headset is optional for Project 14. Check Walmart or your local dollar or other discount store.

Figure 1-1

Tools and Supplies

You need the following hand tools and other supplies to help you build your projects:

✓ Solderless breadboard: You use a solderless (pronounced “sodd-er-less”) breadboard like the one shown in Figure 1-2 to build circuits. Purchase a breadboard that has at least 830 contact holes (also called tie points) and includes power rails (also called power lanes or bus lines), such as Tayda Electronics #A-2372 ($4.59) or RadioShack #2760001 ($22.00).

✓ Wire stripper/cutter: You use this tool to cut wires, trim component leads, and strip insulation from the end of wires. I recommend getting a gauged wire stripper/cutter (Figure 1-3, left), but you can use an adjustable wire stripper/cutter (Figure 1-3, right) instead. Make sure your wire stripper can be adjusted to strip 22-gauge (22 AWG) wire. ($7.00–$20.00 at RadioShack, hardware stores, or Walmart.)

✓ Needle-nose pliers: Pictured in Figure 1-4, needle-nose pliers help you bend leads and wire and make it easier to insert and remove components from your solderless breadboard. (Check your family’s toolbox or get a set of 5-inch pliers for $6.00–$12.00 at a hardware store or Walmart.)

✓ Antistatic wrist strap: You use a strap like the one in Figure 1-5 to prevent the charges that build up on your body from zapping – and potentially damaging – the static-sensitive 4017 integrated circuit (IC) (used in Projects 12 and 13) during handling. Buy RadioShack #2762395, Zitrade #S-W-S-1, or similar. ($9.00 in select RadioShack stores; $2.00–$12.00 on Amazon.com, Walmart.com, and Newark.com.)

✓ Safety glasses: Okay, so you risk looking a bit geeky wearing safety glasses like the ones shown in Figure 1-6 while you work on your electronics projects. But better to look geeky than to not be able to look at all because the wire that you just clipped went flying into your eye. (3M #11228-00000-100 is actually attractive and costs about $1.00 on Amazon.com.)

✓ Electrical tape: You need about 4–6 inches of 3/4-inch electrical tape, such as Scotch #4218-BA-40. ($2.00 per roll at Walmart or any hardware store.)

✓ Hot glue gun: This item is optional for Project 14. You can purchase one at any craft store.

✓ One 9-by-12-inch sheet of adhesive craft foam: Check your local craft store (roughly $1.00). (Amazon and Walmart sell multipacks for $12.00–$15.00.)

✓ One package of assorted grit sandpaper: If you don’t already have this, you can purchase it from any hardware store, Walmart, Amazon.com, and other suppliers ($5.00 or less).

✓ Assorted household items: One toilet paper roll, one paper towel roll, aluminum foil, one sheet of plain white paper, transparent tape, a ruler, a magnifying glass (optional), and one piece of cardboard or a plastic lid (optional).

Figure 1-2

Figure 1-3

Figure 1-4

Figure 1-5

Figure 1-6