Читать книгу Home Pork Making - A. W. Fulton - Страница 24

In the accompanying cut, Fig. 11, the hoister represents a homemade apparatus that has been in use many years and it has been a grand success. The frames, a, a, a, a, are of 2x4 inch scantling, 8 ft. in length; b, b, are 2x6 inch and 2 ft. long with a round notch in the center of the upper surface for a windlass, d, to turn in; c, c are 2x4 and 8 ft. long, or as long as desired, and are bolted to a, a. Ten inches beyond the windlass, d, is a 4x4 inch piece with arms bolted on the end to turn the windlass and draw up the carcass, which should be turned lengthwise of the hoister until it passes between c, c. The gambrel should be long enough to catch on each side when turned crosswise, thus relieving the windlass so that a second carcass may be hoisted. The peg, e, is to place in a hole of upright, a, to hold the windlass. Brace the frame in proportion to the load that is to be placed upon it. The longer it is made, the more hogs can be hung at the same time.