Читать книгу macOS Sierra For Dummies - Bob LeVitus - Страница 12

In the following sections, I give you a closer look at windows themselves: how you move them, size them, and use them. And although Sierra windows are similar to windows you’ve used in other versions of Mac OS (and even, dare I say it, Windows), you may just discover a new wrinkle or two.

If you’re relatively new to the Mac, you may want to read this section while sitting at your computer, trying the techniques as you read them. You may find it easier to remember something you read if you actually do it. If you’ve been using your Mac for a while, you’ve probably figured out how windows work by now.

Opening and closing windows

To start peering into windows on your Mac, first you need to know how to open and close them. When you’re working in the Finder, you can choose the following commands from the File menu. Note that you’ll probably find similar commands on the File menu of programs other than the Finder.

You’ll use many of these commands frequently, so it would behoove you to memorize the keyboard shortcuts. If you’re not sure how keyboard shortcuts work, check out “Using keyboard shortcut commands,” later in this chapter.

❯❯ New Finder Window (+N): Opens a new Finder window. In other programs, +N might open a new document, project, or whatever that program helps you create.

❯❯ Open (+O): Opens the selected item, be it an icon, a window, or a folder.

❯❯ Close Window (+W): Closes the active window. If no windows are open or if no window is selected, the Close Window command is grayed out and can’t be chosen. Or if you prefer, you can close a window by clicking the red Close button in the top-left corner.

If you hold down the Option key with the File menu open, the Close Window command changes to Close All. This very useful command enables you to close all open Finder windows. But it shows up only when you press the Option key or use its keyboard shortcut (+Option+W); otherwise, it remains hidden.

Note that several other commands in the File menu transmogrify when you press the Option key. It would be off topic to get into them here, but here’s a tip: Press the Option key, and browse all the Finder menus. At least a dozen useful commands appear only when the Option key is pressed. Press it early and often for hidden (often time-saving) commands.

Resizing windows and window panes

If you want to see more (or less) of what’s in a window, just hover the pointer over any edge or corner and drag. When the cursor turns into a little double-headed arrow, as shown in Figure 2-5, click and drag to resize the window.

FIGURE 2-5: Hover the pointer over any corner or edge; when the double-headed arrow (resizer) cursor appears, click and drag to resize the window.

Display windows, like those in the Finder, frequently consist of multiple panes. If you look at Figure 2-5, the line divides the Sidebar to the left of it and the actual contents of the window to the right. When your mouse pointer hovers over the resizing area of this bar, the cursor changes to a vertical bar (or it could be horizontal if the panes are one above the other) with little arrows pointing out of both sides, as shown in the margin and Figure 2-5.

When you see this cursor, you can click and drag anywhere in the dividing line that separates the Sidebar from the rest of the window. Doing so resizes the two panes relative to each other; one gets larger and one gets smaller.

Moving windows

To move a window, click anywhere in a window’s gray title bar or toolbar (except on a button, menu, or search field) and drag the window to wherever you want it. The window moves wherever you move the mouse, stopping dead in its tracks when you release the mouse button.

If you can’t find the cursor on the screen, wiggle your finger on the trackpad or jiggle the mouse. In Sierra, these movements magnify the pointer to make it easier to find onscreen.

Shuffling windows

I’ve already spent plenty of pages giving you the scoop on how to work with windows. But wait. There’s more! The commands on the Window menu provide tools you can use to manage your windows.

Here is a brief look at each of the items on the Window menu (and if you’re unfamiliar with menus and keyboard shortcuts, I explain how they work later in this chapter):

❯❯ Minimize (+M): Use this command to minimize the active Finder window to the Dock and unclutter your Desktop. It’s the same as clicking the yellow gumdrop button.

❯❯ Zoom: This command does the same thing as the green gumdrop button. If you’ve forgotten what the green gumdrop does already, just turn back a few pages to the “Top o’ the window to ya!” section and read it again.

❯❯ Cycle through Windows (+`): Each time you choose this command or use the keyboard shortcut for it, a different window becomes active. So if you have three windows – call ’em Window 1, Window 2, and Window 3 – and you’re using Window 1, this command deactivates Window 1 and activates Window 2. If you choose it again, the command deactivates Window 2 and activates Window 3. Choose it one more time, and it deactivates Window 3 and reactivates Window 1.

The next four commands in the Window menu help you manage Sierra Finder window tabs (which were introduced in OS X 10.9 Mavericks). If you’re a fan of tabbed browsing (à la Safari), you’ll love tabs in a Finder window.

Tabs let you view multiple folders and/or disks in a single window, with each folder or disk in its own tab, as shown in Figure 2-6.

FIGURE 2-6: I can view the contents of my Downloads, Applications, or Documents folders by merely clicking the appropriate tab.

Tabbed windows are an ingenious way to cram a lot of information into a little space. I’ve tried a number of third-party utilities that purported to provide tabbed Finder windows, but I’ve never found one that’s reliable and robust enough to continue using. This one, on the other hand, just works.

Sierra introduces system-wide tabbed windows, which should work in almost every application that uses windows. The cool part is the app doesn’t have to be updated in any way – Sierra grafts tabbed windows onto almost every app that displays multiple windows, as shown in Figure 2-7.

FIGURE 2-7: This application – GraphicConverter9 – is a couple years old but it still gets Sierra’s new systemwide tabbed windows.

The remaining commands in the Window menu are

❯❯ Show Previous Tab (Control+Shift+Tab): Each time you choose this command or use the keyboard shortcut for it, the previous tab – the one to its left, unless it’s the leftmost tab – becomes active. For example, in Figure 2-6, Documents is the active tab. Use this command, and Applications becomes the active tab. Use it a third time, and Downloads becomes active. Because Downloads is the leftmost tab, if you use this command yet again, it wraps around and Documents becomes the active tab again.

❯❯ Show Next Tab (Control+Tab): Same as Show Previous Tab except in reverse. Instead of showing the previous tab (the one to the left), this command shows the next tab (the one to the right). Use this command three times in a row (refer to the order shown in Figure 2-6), and you see the Downloads, then the Applications, and finally the Documents tabs again.

❯❯ Move Tab to New Window (no keyboard shortcut): Does just what it says: Moves the active tab into a new window of its own.

❯❯ Merge All Windows (no keyboard shortcut): Combines all open windows and tabs in one window.

You can click a tab and drag it left or right to change the order. You can also drag and drop a tab from one Finder window to another. The trick is to click right on a tab and drag it onto the tabs in the target window. If you release it anywhere else, the tab will be displayed in a new window.

One more thing: In Sierra, all these commands and keyboard shortcuts appear in most apps that display windows.

❯❯ Bring All to Front (no keyboard shortcut): Windows from different applications can interleave. For example, you can have (from front to back) a Finder window, a Microsoft Word window, an Adobe Photoshop window, another Microsoft Word window, and another Finder window. In this example, choosing Bring All to Front while the Finder is the active application enables you to have both of the Finder windows move in front of those belonging to Word and Photoshop.

If you want to bring all the windows belonging to the Finder (or any other program, for that matter) to the front at the same time, you can also click the appropriate Dock icon (the Finder, in this case).

If you hold down the Option key when you click the Window menu, Minimize Window changes to Minimize All, and the Zoom command changes to Zoom All.

❯❯ Other items: The remaining items on the Window menu – if any – are the names of all currently open Finder windows. Click a window’s name to bring it to the front.