Читать книгу Continuous Emission Monitoring - James A. Jahnke - Страница 116

1 Chapman, R.L. (1974). Continuous stack monitoring. Environmental Science & Technology 8 (6): 520525.

2 Dillehay, D. (1993). Direct extractive measurement of unconditioned wet flue stack gases. In: Proceedings – Continuous Emission Monitoring – A Technology for the 90s, 350–359. Pittsburgh: Air and Waste Management Association.

3 Electric Power Research Institute (1993). Continuous Emission Monitoring Guidelines: Update. EPRI TR‐102386‐V1. Palo Alto: Electric Power Research Institute.

4 Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (2008). Air Pollution Prevention Manual on Emission Monitoring. Research Report 360 16 004 UBA – FB 001090. DessauRosslau, Germany: Federal Environment Agency.

5 Frank, H. and Mullowney, R. (1990). Recycling ambient monitors as stack gas monitors at Dairyland power. In: Proceedings – Specialty Conference on: Continuous Emission Monitoring – Present and Future Applications, 390–392. Pittsburgh: Air and Waste Management Association.

6 Houser, E.A. (1977). Principles of Sampling Handling and Sampling System Design for Process Analysis. Pittsburgh: Instrument Society of America.

7 Jahnke, J.A. (1995). Eliminating bias in CEM systems. In: Proceedings – Acid Rain & Electric Utilities – Permits, Allowances, Monitoring, & Meteorology, 391–400. Pittsburgh: Air & Waste Management Association.

8 Jahnke, J.A. (1994). An Operator's Guide to Eliminating Bias in CEM Systems. EPA 430‐R‐94‐016. Washington, DC: Environmental Protection Agency.

9 Jahnke, J.A. and Johnson, W.E. (2003). Continuous Emission Monitoring (CEM) System Application and Maintenance Guide. Electric Power Research Institute Technical Report 1009057. Palo Alto, CA

10  Laird, J.C., Patton, J.C., Zolner, W.J., and Tomlin, R.L. (1978). Unique extractive stack sampling system for continuous emission monitoring. Paper presented at the Instrument Society of America Meeting, Houston, (22–25 May 1978).

11 Maurice, R.L., Robertson, J.A., and Howder, J.M. (1986). Design, specification, and installation of a replacement CEM at Apache Station. In: Transactions – Continuous Emission Monitoring – Advances and Issues, 44–51. Pittsburgh: Air Pollution Control Association.

12 Myers, R.L., Fredette, P., and Vojtko, D. (1995). New Vacuum Dilution sample transport system provides low maintenance CEMS front‐end with greatly enhanced flexibility. In: Proceedings – Acid Rain & Electric Utilities – Permits, Allowances, Monitoring, & Meteorology, 690–701. Pittsburgh: Air & Waste Management Association.

13 Navarre, A.J. and Ayer, C. (1978). Development of champion papers' stack gas sampling/calibration system using a calibration probe. Paper presented at Air Pollution Control Association Meeting, Houston, paper 78‐47.5 (25–30 June 1978).

14 Patton, J.C., Martin, G.W., Ross, J.A., and Spangler, W. (1979). A turn‐key extractive sampling system to continuously monitor gaseous emissions from fossil fuel fired boiler stacks. Paper presented at the Air Pollution Control Association Meeting, Cincinnati, paper 79‐35.1 (24–29 June 1979).

15 Peritsky, M.M., Wood, R.D., and Wendt, J.O.L. (1981). Extractive Flue‐gas Sampling Challenges Insitu Methods. Power (December).

16 Richards, J.A. (1984). Guidelines on Preferred Location and Design of Measurement Ports for Air Pollution Control Systems. EPA‐340/1‐84‐017.

17 Schakenbach, J. Fax, G., and Werner, A.. (2002) Spin off of selected CEMS‐related QA activities selected CEMS‐related QA activities. Paper presented at the Air & Waste Management Association Meeting, Baltimore, paper 42583 (23–27 June 2002).

18 Shapiro, A.H. (1953). The Dynamics and Thermodynamics of Compressible Fluid Flow. New York: Ronald Press.

19 Sherman, R.E. (2002). Process Analyzer Sample‐Conditioning System Technology. New York: Wiley.

20 Sorrel, C.B. (1986). Critical orifice in gas sampling trains for volume and rate measurements. Paper presented at the Air Pollution Control Association Meeting, Minneapolis, paper 8671.1.

21 Tatera, J. (1993). A review and discussion of several design requirements that will impact CEM systems used in hazardous process plant environments. In: Proceedings – Continuous Emission Monitoring – A Technology for the 90s, 99–110. Pittsburgh: Air and Waste Management Association.

22 Turnbull, J. (1998). Sample handling and calibration. In: Proceedings – CEM 98 International Workshop on Continuous Emissions Monitoring, 184–192. London: IEA Coal Research.

23 Waters, T. (2013). Industrial Sampling Systems: Reliable Design & Maintenance for Process Analyzers. Swagelok Company.