Читать книгу Coal-Fired Power Generation Handbook - James Speight G., James G. Speight - Страница 13

An ever-expanding human population is matched by an ever-increasing demand for energy to the extent that the world is presently faced with the situation of energy demand exceeding the energy in circulation and the energy production even from a variety of sources (Speight, 2011a, 2020). The production and consumption of energy have been associated with adverse environmental impacts such that the United Nations conference in Kyoto, Japan, in 1997 had to have what is known as the Kyoto Protocol that sets limits on carbon dioxide emissions into the atmosphere (Hordeski, 2008; Irfan et al., 2010).

Coal (the term is used generically throughout the book to include all types of coal), geographically spread across all inhabitable continents of the world, is a black or brownish- black organic sedimentary rock of biochemical origin which is combustible and occurs in rock strata (coal beds, coal seams) and is composed primarily of carbon with variable proportions of hydrogen, nitrogen, oxygen, and sulfur. Coal is the most plentiful fuel in the fossil family and, in the current context, the United States has more coal reserves than any other country in the world. In fact, one-fourth of all known coal in the world is in the United States, with large deposits located in 38 states, which represents almost as much energy in coal that can be mined as the rest of the world has in oil that can be pumped from the ground. Also, in the context of this book, the more efficient use of coal is the focus since electricity from coal represents more than 50% of current electricity generation in the United States.

Coal has been a vital energy source to human populations for millennia. For example, in approximately 1000 BC, the Chinese relied on coal to smelt copper that served as the basis for their currency, and the Greek philosopher Aristotle made reference to it in his writings when he alluded to a dark charcoal-like rock (World Coal Institute, 2008). Furthermore, the discovery of coal cinders among Roman ruins in England suggests that the Romans relied on coal as a source of energy prior to AD 400.

The first written record of coal in the Americas was taken in 1673 by Louis Joliet who noted carbon de terra while mapping out the Illinois River region. In more recent times, the Nanticoke Indians, a Native American tribe who lived in Pennsylvania, were using local anthracite coal as a source for energy and jewelry during the 1760s (Dublin and Licht, 2005). This energy resource that provided fuel for ancient civilizations is all but history. In the modern world, steam coal, metallurgical coal, and industrial coal all play a vital role in the economy of many countries, especially the United States.

Coal continues to power vital industries. The iron industry still relies on basic oxygen furnaces that require a special type of coal known as metallurgical or coking coal to produce steel. Coke from coking coal is combined with limestone in a furnace where iron ore is blasted with pure oxygen and converted to steel. However, more pertinent to the present text, the electricity that powers electric arc furnaces is usually generated by burning pulverized thermal coal.

Coal was the key energy source for the Industrial Revolution, which has provided amenities that most people in the modern world take for granted – including electricity, new materials (steel, plastics, cement, and fertilizers), fast transportation, and advanced communications. Coal replaced wood combustion because of (i) abundance of coal, (ii) higher volumetric energy density of coal, and (iii) the relative ease of transportation of coal (Ashton, 1969; Freese, 2003).

The Industrial Revolution itself refers to a change from hand and home production to machine and factory. The first Industrial Revolution was important for the inventions of spinning and weaving machines operated by water power which was eventually replaced by steam. This helped increase growth and changed late 18^th century society and economy into an urban-industrial state. New fuels such as coal and crude oil were incorporated into new steam engines, which revolutionized many industries including textiles and manufacturing.

The demand for coal decreased for transportation and heating purposes due to intensified competition from crude oil, and activity increased in the post-World War II industrial sector as well as the electricity generation sector after the 1960s. As the demand for power increased, the demand for coal has continued to rise over the years.

The 1973 oil embargo renewed interest in the vast domestic coal reserves of the United States. This sharp rise in coal production helped solve the growing problem of scarce oil resources that were in high demand.

The demand for coal was also impacted by the Power Plant and Industrial Fuel Use Act (FUA) of 1978, which required most oil or natural gas burning power plants to switch to coal. As a result, the energy of the United States became significantly more dependent on coal. After repeal of FUA in 1987, natural gas use in electric power plants increased by 119% between 1988 and 2002. Indeed, the spike in natural gas consumption goes to show the influence the FUA had on increasing US reliance on coal as a source of energy.

As developing countries such as China and India require more energy to meet their rapidly growing demand, competition for coal will continue to increase. The United States has 96% of the coal reserves in North America, which accounts for approximately 26% of the total known coal reserves. As a result, the United States will be expected to export more coal to meet the strong demand from the world market. In doing so, the price of coal will remain stable, and developing countries will be able to meet their energy needs.

Coal is currently responsible for generating approximately 50% of the world electricity. In fact, the demand for coal in the United States is primarily driven by the power sector, which consumes 90% of all domestic coal production. In 1950 however, only 19% of coal was used by the power sector due to its high demand by other sectors such as industry, residential and commercial, metallurgical coke ovens, transportation, and electric power, which all accounted for an amount on the order of 5 to 25% of the total coal consumption at the time. Of the coal produced worldwide, approximately 65% is shipped to electricity producers and 33% to industrial consumers, with most of the remainder going to consumers in the residential and commercial sectors. The total share of total world energy consumption by coal is expected to increase to one-third (approximately 30 to 33%) in 2035, although growth rates of coal consumption are not expected to be even in all countries where coal is used as an energy source (International Energy Agency, 2010; Energy Information Administration. 2011, 2012a, 2012b).

Coal-fired power plants, also known as electricity generations plants and power stations, provide approximately 42% of US electricity supply and more than 42% of global electricity supply. In fact, the electricity generation sector is essential to meeting current and future energy needs (MIT, 2007; EIA, 2012a, 2012b; Speight; 2013, 2020).

Furthermore, global demand for electricity will continue to rise steeply until at least 2040, as the fuels used for electricity generation continue to shift to lower-carbon sources, such as natural gas, nuclear and renewables. Even now, the demand for electricity continues to rise in all parts of the world. Population and economic growth are two main reasons, just as they are for the projected demand growth in other fuels. There is a switch to electricity from other forms of energy, such as oil or biomass for lighting and heating in the home, or coal in the industrial sector. The key to this growing demand is to make electricity generation more efficient than is currently observed.

As a result of current trends in the electric power market, many coal-fired generators in the United States are slated for retirement (Energy Information Administration, 2010, 2011, 2012a, 2012b). Most of the coal-fired power plants projected to retire are older, inefficient units primarily concentrated in the Mid-Atlantic, Ohio River Valley, and southeastern United States where excess electricity generating capacity currently exists. Lower natural gas prices, higher coal prices, slower economic growth, and the implementation of environmental rules all play a role in the retirements. Coal-fired generators in these regions, especially older, less efficient ones that lack pollution control equipment, are sensitive to changing trends in fuel prices and electricity demand, which are two key factors that influence retirement decisions.

The coal-fired power plants vulnerable to retirement are older power plants generators with high heat rates (lower efficiency) that do not have flue gas desulfurization (FGD) systems installed. Approximately 43% of all coal-fired plants did not have flue gas desulfurization systems installed as of 2010 and such plants will be required to install either a FGD or a dry sorbent injection system to continue operating in compliance with the mercury and air toxics standards (MATS).

Coal capacity retirements are sensitive to natural gas prices. Lower natural gas prices make coal-fired generation less competitive with natural gas-fired generation. Because natural gas is often the marginal fuel for power generation, lower natural gas prices also tend to reduce the overall wholesale electricity price, further reducing revenues for coal-fired generators.

Installation of environmental control systems will add internal energy requirements, reducing the efficiency of the plant. There are some changes that can be employed to make an existing unit more efficient. However, these changes typically will only result in an improvement to efficiency of a percentage point or so. In order to produce higher efficiency ratings, higher pressure and temperatures are required. This increases the cost of the plant as special alloy materials will be needed. Technology improvements can assist by lowering the cost of these special materials through discovery and better manufacturing process.

Electricity generation in a coal-fired power station requires combustion of the coal, after which the energy released during the combustion is used to generate steam which is then used to drive the turbine generators that produce electricity. The power station can be conveniently divided in four separate but, in reality, integrated operations: (i) the combustor or firebox, (ii), the boiler, (iii) the turbine generator, and (iv) the condenser.

Before the coal is burned in the combustor, it is pulverized (often to an extremely small size that has been stated to have the appearance of a black talcum powder) after which the coal is mixed with hot air and blown into the combustor. The coal is burned in suspension and provides the most complete combustion and maximum heat possible.

In the boiler, purified water is pumped through pipes inside the boiler which converts the water to steam. At temperatures up to 540°C (1000°F) and under pressures up to 3500 psi, the steam is piped to the turbine where it contacts a series of turbine blades and turns the turbine shaft. The turbine shaft is connected to the shaft of the generator, where magnets spin within wire coils to produce electricity. The steam is then drawn into a condenser which condenses the steam back into water so that it can be used over and over again in the plant. Millions of gallons of cooling water are pumped through a network of tubes that runs through the condenser and after the steam is condensed, it is pumped to the boiler again to repeat the cycle.

Coal quality is the term used to refer to the properties and characteristics of coal that influence its behavior and use. Coal quality has an impact on many parts of a power plant including the coal handling facilities, pulverizing mills, boiler, air heater, electrostatic precipitator, ash disposal as well as stack emissions. Because coals have different characteristics and heat content, the behavior of a coal in a boiler is strongly influenced by the rank of the coal as well as and by the content (and type) of the mineral matter and other impurities associated with it. Coal properties can affect the efficiency, reliability, and availability of both the boiler and the emissions control units, and therefore, the properties affect the economics as well as the short- and long-term operation of the plant.

Among the coal-quality characteristics that are important for coal-fired power plants are the concentrations, distribution, and forms of the many elements contained in the coal feedstock. Knowledge of these quality characteristics in coal deposits may allow us to use this essential energy resource more efficiently and effectively and with less undesirable environmental impact.

In fact, the performance of power plants and the costs of power generation are influenced by many coal properties. Specifically, coal quality impacts not only coal cost but also net power output as well as capital and operating and maintenance costs and waste disposal costs. In fact, coal quality impacts the coal chain in a power plant and their relationship to power generation costs.

Thus, an essential part of power plant development is the rigorous analysis of information which should be internally consistent and verifiable, such as coal quality, coal consumption and electricity output. It is, therefore, necessary to understand operating information for units at coal-fired power plants not only for the purposes of determining, monitoring, reporting, comparing, and projecting coal-fired power plant efficiencies but also for monitoring carbon dioxide emissions (as well as the emission of other noxious gases and particulate matter).

Thus, to develop combustion technology for efficient production of electricity, the influences of the coal properties, such as the (i) the elemental composition of the coal, (ii) rank of the coal, the mineral matter content of the coal, (iii) the size of the pulverized coal particles, and (iv) the tendency of the combustion system to produce fly ash and bottom slag are all of considerable importance and need to be addressed in assessing the potential performance of a coal-fired electricity generating plant.

Briefly, the degree of alteration (or metamorphism) that occurs as a coal matures from peat to anthracite is referred to as the rank of the coal (Table 1.1). Low-coal includes lignite and sub-bituminous coal which have a lower energy content (because of the low carbon content) and relatively high moisture content. High-rank coals, including bituminous and anthracite coals, contain more carbon than lower-rank coals which results in a much higher energy content. The high-rank coals also have a more vitreous (shiny) appearance and lower moisture content then lower-rank coals.

Table 1.1 Coal ranks*.

Rank	Description
Lignite	The largest portion of the coal reserves of the world. A soft, brownish-black coal which is the lowest level of the coal family. The texture of the original wood can even be seen in some pieces primarily found west of the Mississippi River.
Subbituminous coal	A dull black coal which, when burned, releases more energy (heat) than lignite when burned; mined mostly in Montana, Wyoming, and a few other western states.
Bituminous coal	Sometimes called soft coal; found primarily east of the Mississippi River in midwestern states such as Ohio and Illinois and in the Appalachian mountain range from Kentucky to Pennsylvania.
Anthracite	The hardest coal and gives off the greatest amount of heat when burned; the reserves of anthracite in the United States are located primarily in Pennsylvania.

*As mined in the United States.

However, before turning to a fuller description of coal properties and power generation (Chapters 5, 6, 11), it is necessary to understand the occurrence of coal and whether or not present estimates are sufficient to produce the electric power necessary for the next several decades.

Production of steel accounts for the second-largest use of coal. Minor uses include cement manufacture, the pulp and paper industry, and production of a wide range of other products (such as coal tar and coal chemicals). The steel industry uses coal by first heating it and converting it into coke, a hard substance consisting of nearly pure carbon (Speight, 2013). The coke is combined with iron ore and limestone, and then the mixture is heated to produce iron. Other industries use different coal gases emitted during the coke-forming process to make fertilizers, solvents, pharmaceuticals, pesticides, and other products.

Finally, in order to generate electric power using the maximum energy in coal, all aspects of a coal need to be understood, including (i) handling and storage characteristics, (ii) pulverizing behavior, (iii) combustion behavior, (iv) mineral matter and ash chemistry interactions in addition to the characteristics of the coal and its ash in terms of environmental factors such as dust, self-heating and emissions components. In order to ensure that quality is controlled, the coal chain must be regularly sampled and adjusted in accordance with the analytical results (Chapters 5, 6). Key control parameters, which when monitored, can provide a reliable indication of quality in terms of both specification and consistency requirements.

Finally, the International Energy Agency (IEA) predicts that world energy demand will grow around 60% over the next 30 years, most of it in developing countries. China and India are large countries in terms of both population and land mass, and both have substantial quantities of coal reserves – cumulatively, China and India account for 70% of the projected increase in world coal consumption. Strong economic growth is projected for both countries (averaging 6% per year in China and 5.4% per year in India from 2003 to 2030), and much of the increase in their demand for energy, particularly in the industrial and electricity sectors, is expected to be met by coal.

Even as demand grows, society expects cleaner energy with less pollution and an increasing emphasis on environmental sustainability. The coal industry recognizes it must meet the challenge of environmental sustainability. In particular the industry must reduce the greenhouse gas emissions if the industry is to remain a part of a sustainable energy future. The quality of coal needs to be assessed so that it can be suitably used in different industries. The mineral matter content and its type will give an idea related to the coal preparation practice that will be required to be adopted for coal cleaning and subsequent use.

Investigation of physical properties such as Hardgrove grindability index will help in deciding the type and capacity of crushing and grinding machine required in coal beneficiation plants. Spontaneous heating susceptibility studies of coal will help in deciding the coal in a judicious manner such that the coal is utilized before it catches fire. Keeping this in view the current text, it will become obvious that determination of coal quality and coal behavior are necessary to ensure that coal is utilized in the most optimum and environmentally acceptable manner.