Читать книгу Automotive Machining - Mike Mavrigian - Страница 3
ОглавлениеCarTech®, Inc.
838 Lake Street South
Forest Lake, MN 55025
Phone: 651-277-1200 or 800-551-4754
Fax: 651-277-1203
© 2017 by Mike Mavrigian
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without prior permission from the Publisher. All text, photographs, and artwork are the property of the Author unless otherwise noted or credited.
The information in this work is true and complete to the best of the knowledge. However, all information is presented without any guarantee on the part of the Author or Publisher, who also disclaim any liability incurred in connection with the use of the information and any implied warranties of merchantability or fitness for a particular purpose. Readers are responsible for taking suitable and appropriate safety measures when performing any of the operations or activities described in this work.
All trademarks, trade names, model names and numbers, and other product designations referred to herein are the property of their respective owners and are used solely for identification purposes. This work is a publication of CarTech, Inc., and has not been licensed, approved, sponsored, or endorsed by any other person or entity. The Publisher is not associated with any product, service, or vendor mentioned in this book, and does not endorse the products or services of any vendor mentioned in this book.
Edit by Paul Johnson
Layout by Monica Seiberlich
ISBN 978-1-61325-404-2
Item No. SA378
Library of Congress Cataloging-in-Publication Data Available
Written, edited, and designed in the U.S.A.
10 9 8 7 6 5 4 3 2 1
Title Page:
Valveseats may be ground with an abrasive stone or cut with seat cutters. Cutters provide a more precise finish.
Back Cover Photos
Top:
With a deck plate installed and torqued, honing with the appropriate grade of stones begins. To reduce the effect of heat transfer between cylinders, bores are honed in an alternating manner. Cooling liquid is constantly applied during all stages of honing. This transfers heat from the block and aids in keeping the honing stones clean.
Middle Left:
After a bore gauge has been set up to match the crank main journal diameter, the gauge is inserted into the installed main bearing to determine the bearing ID relative to the crank main journal.
Middle Right:
The piston dome is receiving a custom dome profile on a CNC lathe.
Bottom:
This example shows a 4-barrel single plane intake manifold is mounted via a fixture plate, ready to be custom ported. Machining at a variety of angles is possible, since both the head and base move in various axes, achieving intricate cuts at varying angles. (Photo Courtesy Centroid)
DISTRIBUTION BY:
Europe
PGUK
63 Hatton Garden
London EC1N 8LE, England
Phone: 020 7061 1980 • Fax: 020 7242 3725
Australia
Renniks Publications Ltd.
3/37-39 Green Street
Banksmeadow, NSW 2109, Australia
Phone: 2 9695 7055 • Fax: 2 9695 7355
