Читать книгу Adhesives for Wood and Lignocellulosic Materials - R. N. Kumar - Страница 36

References

Оглавление

1. Gao, H., Learning from Nature about Principles of Hierarchical Materials. Nanoelectronic Conference (INEC) 3rd International Conference, Hongkong, China, 4 March 2010, 2010.

2. Lakes, R., Materials with structural hierarchy. Nature, 361, 511–515, 1993.

3. Moon, R.J., Frihart, C.R., Wegner, T., Nanotechnology applications in the forest products industry. For. Prod. J., 56, 5, 4–10, 2006.

4. Gardner, D.J., Blumentritt, M., Wang, L., Yldirim, N., Adhesion theories in wood adhesive bonding, in: Progress in Adhesion and Adhesives, K.L. Mittal (Ed.), pp. 125–168, Scrivener Publishing, 2015.

5. River, B.H., Vick, C.B., Gillespie, R.H., Wood as an adherend, in: Treatise on Adhesion and Adhesives, vol. 7, J.D. Minford (Ed.), pp. 131–133, Marcel Dekker, New York, 1991.

6. Wiedenhoeft, A.C., Structure and function of wood, chapter 3, in: Wood Handbook, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI, General Technical Report FPL-GTR-190, 3-1-3-18, 2010.

7. Hillis, W.E., Formation of robinetin crystals in vessels of Intsia species. IAWA J., 17, 405–419, 1996.

8. Wheeler, E.A., Baas, P., Gasson, P.E., IAWA list of microscopic features for hardwood identification, vol. 10, pp. 219–332, IAWA Committee, Rijksherbarium, 1989.

9. Esau, K., Anatomy of seed Plants, 2nd edn., John Wiley & Sons, New York, 1977.

10. Dickison, W., Integrative Plant Anatomy, Academic Press, Orlando, 2000.

11. Fengel, D. and Wegener, G., Wood: Chemistry, Ultrastructure, Reactions, 2nd edn., Walter de Gruyter, Berlin, 1989.

12. Barber, N.F. and Meylan, B.A., The anisotropic shrinkage of wood: A theoretical model. Holzforschung, 18, 146–156, 1964.

13. Brandstrom, J., Bardage, S.L., Nilsson, D.G.T., The structural organisation of the S1 cell wall layer of Norway spruce tracheids. IAWA J., 24, 27–40, 2003.

14. Heyn, A., The ultrastructure of wood pulp with special reference to the elementary fibril of cellulose. Tappi, 60, 11, 159–161, 1977.

15. Gierlinger, N. and Burgert, I., Secondary cell wall polymers studied by con-focal Raman microscopy: Spatial distribution, orientation, and molecular deformation. N. Z. J. For. Sci., 36, 1, 60–71, 2006.

16. Fahlén, J., The Cell Wall Ultrastructure of Wood Fibres—Effects of the Chemical Pulp Fibre Line, KTH Fibre and Polymer Technology, Stockholm, Sweden, 2005.

17. Pettersen, R.C., The chemical composition of wood, in: The Chemistry of Solid Wood, R.M. Rowell (Ed.), Advances in Chemistry Series 207, American Chemical Soc., Washington, DC, 1984.

18. Goring, D.A.I. and Timell, T.E., Molecular weight of native cellulose. Tappi, 45, 454–460, 1962.

19. Sjöström, E., Wood Chemistry: Fundamentals and Applications, Academic Press, Orlando, USA, 1993.

20. Oghbaie, M., Mirshokraie, S.A., Massoudi, A.H., Partovi, T., Opimisation of lignin extraction. Mod. Chem., 2, 5, 36–40, 2014.

21. Hossain, Md. M. and Aldous, L., Ionic liquids for lignin processing: Dissolution, isolation and conversion. J. Chem., 65, 1465–1477, 2012.

22. Elstner, E.F. and Heupel, A., Formation of hydrogen peroxide by isolated cell walls from horseradish (Armoracia lapathifolia Gilib.). Planta, 130, 175–180, 1976.

23. Halliwell, B., Lignin synthesis: The generation of hydrogen peroxide and superoxide by horseradish peroxidase and its stimulation by manganese (II) and phenols. Planta, 140, 81–88, 1978.

24. Glasser, W.G., Lignin, in: Pulp and Paper Chemistry and Chemical Technology, 3rd edn., J.P. Casey (Ed.), pp. 39–111, Wiley Interscience, New York, 1980.

25. Wang, D., Wang’s Wood Chemistry Class, Basic Lignin Chemistry, David Wang’s Wood Chemistry Class, National Chung Hsing University, Forestry Dept. http://web.nchu.edu.tw/pweb/users/taiwanfir/lesson/10476.pdf.

26. Adler, E., Lignin chemistry: Past, present and future. Wood Sci. Technol., 11, 169–218, 1977.

27. Marra, A., Technology of Wood Bonding Principles in Practice, Van Nostrand, Reinhold, New York, 1992.

28. Brady, E. and Kamke, F.A., Effects of hotpressing parameters on resin penetration. For. Prod. J., 38, 63–68, 1988.

29. Collett, B.M., A review of surface and interfacial adhesion in wood science and related fields. Wood Sci. Technol., 6, 1–42, 1972.

30. Jakal, L., Effect of the penetration of adhesive on the strength of adhesion. Faipar, 34, 2, 59–60, 1984.

31. Sernek, M., Resnik, J., Kamke, F.A., Penetration of liquid urea–formaldehyde adhesive into beech wood. Wood Fibre Sci., 31, 1, 41–48, 1999.

32. Laborie, M.-P., Investigation of the wood/phenol-formaldehyde adhesive interphase morphology. PhD thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, 2002.

33. White, M.S., Influence of resin penetration on the fracture toughness of bonded wood, PhD thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, 1975.

34. Nearn, W.T., Application of the ultrastructure concept in industrial wood products research. Wood Sci., 6, 285–293, 1974.

35. Nearn, W.T., Wood–Adhesive Interface Relations. Conference on the Wood–Paint Interface, Berkeley, October, 1964.

36. Gardner, D.J., Chapter 19, in: Adhesion Mechanisms of Durable Wood Adhesive Bonds, D.D. Stokke and L.H. Groom (Eds.), Wiley, New York BLIO009-Stokke, September 13, 2005, 2006.

37. Sellers, T., Jr., Adhesives in the wood industry, in: Handbook of Adhesive Technology, 1st edn, A. Pizzi and K.L. Mittal (Eds.), pp. 599–614, Marcel Dekker, New York, 1994.

38. Johnson, S.E. and Kamke, F.A., Quantitative analysis of gross adhesive penetration in wood using fluorescence microscopy. J. Adhes., 40, 47–61, 1992.

39. Gray, V.R., The wetting, adhesion and penetration of surface coatings on wood. JOCCA, 44, 756–786, 1961.

40. Hare, D.A. and Kutscha, N., Microscopy of eastern spruce plywood gluelines. Wood Sci., 6, 294–304, 1974.

41. Kedziers, A., Effect of adhesive penetration into wood on the strength of glued joints. Przemsyl-Drzewny, 37, 3, 18–20, 1986.

42. Smith, L.A., Resin penetration of wood cell walls—Implications for adhesion of polymers to wood. PhD thesis, pp. 172–176, Syracuse University, University Microfilms, Ann Arbor, Michigan, 1971.

43. Tarkow, H. and Southerland, C.E., Interaction of wood with polymeric materials: I. Nature of absorbing surface. For. Prod. J., 14, 184–186, 1964.

44. Kamke, F.A. and Lee, J.N., Adhesive penetration in wood—A review. Wood Fiber Sci., 39, 205–220, 2007.

45. Levenspiel, O., Engineering Flow and Heat Exchange, Plenum Press, New York, 1984.

46. Tarkow, H., Feist, W.C., Southerland, C.F., Penetration versus molecular size—Interaction of wood with polymeric materials. For. Prod. J., 16, 10, 61–65, 1966.

47. Marcinko, J.J., Devathala, S., Rinaldi, P.L., Bao, S., Investigating the molecular and bulk dynamics of PMDI/wood and UF/wood composites. For. Prod. J., 48, 6, 81–84, 1998.

48. Frazier, C.E., Isocyanate wood binders, in: Handbook of Adhesive Technology, 2nd edn, A. Pizzi and K.L. Mittal (Eds.), Marcel Dekker, New York, 2003.

49. Frihart, C.R., Adhesive interaction with wood, in: Fundamentals of Composite Processing, pp. 29–53, Madison, WI, Nov. 5–6, 2003. Gen. Tech. Rep. FPL-GTR-149. USDA, For. Serv., For. Prod. Lab, 2004.

50. Kučerová, I., Methods to measure the penetration of consolidant solutions into dry wood. J. Cult. Heritage, 135, 5191–5195, 2012.

51. Siau, J.F., Wood: Influence of Moisture on Physical Properties, Virginia Tech, Blacksburg, VA, Pub. No. 7282 Forest Products Society, Madison, WI, 1995.

52. White, M.S., Influence of resin penetration on the fracture toughness of wood adhesive bonds. Wood Sci., 10, 1, 6–14, 1977.

53. Hse, C.-H., Properties of phenolic adhesives as related to bond quality in southern pine plywood. For. Prod. J., 21, 1, 44–52, 1971.

54. Johnson, S.E. and Kamke, F.A., Characteristics of phenol-formaldehyde adhesive bonds in steam injection pressed flakeboard. Wood Fiber Sci., 26, 259–269, 1994.

55. Frazier, C.E., Schmidt R, R., Ni, J., Towards a Molecular Understanding of Wood–Isocyanate Adhesive Bondline. Proceedings 3rd Pacific Rim Bio-Based Composite Symposium, Kyoto, Japan, Dec. 2–5, pp. 383–391, 1996.

56. Stephen, R.S. and Kutscha, N.P., Effect of resin molecular weight on bonding flakeboard. Wood Fiber Sci., 19, 353–361, 1987.

57. Gollob, L., The correlation between preparation and properties in phenolic resins, in: Wood Adhesives Chemistry and Technology, vol. 2, A. Pizzi (Ed.), pp. 121–153, Marcel Dekker, New York, 1989.

58. Gollob, L., Krahmer, R.L., Wellons, J.D., Christiansen, A.W., Relationship between chemical characteristics of phenol–formaldehyde resins and adhesive performance. For. Prod. J., 35, 3, 42–48, 1985.

59. Zheng, J., Studies of PF resole/isocyanate hybrid adhesives. PhD thesis, 198 pp., Virginia Polytechnic Institute and State University, Blacksburg, VA, 2002.

Adhesives for Wood and Lignocellulosic Materials

Подняться наверх