Читать книгу Motorcycle, Solo (Harley-Davidson Model WLA) - United States. War Department - Страница 10

a. Starting on Level Ground. The engine having been warmed up and checked for satisfactory operation, the vehicle (with operator in riding position) is put in motion as follows:

(1) Transfer body weight to right leg.

(2) Fold back side stand (jiffy stand).

(3) Disengage clutch by depressing clutch foot pedal with heel of left foot.

(4) Shift gear shifter lever into “1” (low) gear position.

(5) Slowly engage clutch by depressing clutch foot pedal with toe of left foot.

(6) When clutch starts to “take hold,” open throttle sufficiently to maintain engine speed.

(7) Accelerate gradually to between 12 and 15 miles per hour in low gear.

(8) Close throttle quickly.

(9) Disengage clutch.

(10) Shift through “N” (neutral) position into “2” (second) gear.

(11) Reengage clutch and accelerate to about 25 miles per hour.

(12) Close throttle quickly.

(13) Disengage clutch.

(14) Shift into “3” (high) gear.

(15) Reengage clutch and accelerate to desired speed.

b. Starting on Uneven or Soft Ground.

(1) If standing on an incline or in loose, heavy ground, more engine power will be required to start vehicle without stalling engine.

(2) It may be necessary to keep vehicle from rolling by keeping pressure on front brake hand lever. Brake pressure is released after vehicle starts in forward motion.

(3) Open throttle and engage clutch at same time to provide power needed for starting, without racing engine unnecessarily.

(4) Motorcycle starts should be made without excessive application of power, with consequent unnecessary spinning of rear wheel.