Читать книгу Raising Goats For Dummies - Cheryl K. Smith - Страница 114

Start by doing the following:

1 Cut the 2 x 4 into four 14-inch-long leg pieces, and label each of these pieces A.

2 Using the remainder of the 2 x 4, cut a 20½-inch piece for the feed holder, and label the piece N.

3 Cut the 1 x 6 into two 20-inch end pieces and label each of these pieces B.

4 Using the remainder of the 1 x 6, cut two 36-inch side pieces, and label these pieces C.

5 Cut one of the 1 x 4s into four 21½-inch pieces, and label these pieces G, H, I, and J, respectively.

6 Using the remainder of the 1 x 4 from Step 5, cut one 18½-inch piece and label it F.

7 Using the remainder of the 1 x 4 from Step 5, cut two 4½-inch pieces, and label these pieces M.

8 Cut the second 1 x 4 into two 36-inch pieces, and label them K and L.

9 Using the remainder of the 1 x 4 from Step 8, cut one 18½-inch piece and label it E.

10 Using the remainder of the 1 x 4 from Step 8, cut two 12-inch pieces for braces and label it O.

You’re done cutting the lumber!