Читать книгу Raising Goats For Dummies - Cheryl K. Smith - Страница 118

To prepare the stanchion, follow these steps:

1 With a tape measure, measure over 2½ inches from the top corner of piece F, and mark with a pencil.

2 From the same corner, measure down the side 5¾ inches, and make a mark across the piece.

3 Using your square as a ruler, draw a line from the first mark to the second mark.

4 Cut with your saw along the line.

5 Place the stanchion supports (E and F) on a table.

6 Place piece H flush with the top and side and place piece G across the lines you drew, 4 inches across.

7 With the cut facing inward on the piece labeled I, predrill holes for 3 screws at each end of pieces G and H.