Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 33

Reassembly Tips:

1. When replacing the barrel bushing and barrel collar or sleeve, align their locking lugs on each side before pushing the assembly into the slide. If this is done, they can be pushed straight in, the bushing turned, and the collar will move forward to lock it in place.

2. When replacing the safety in the frame, use a small screwdriver to depress the safety spring and plunger, holding them down while the safety is pushed in toward the right.

Note that all of the L-pins are not of the same size or length. Keep them with the parts they retain during disassembly, to insure that they will be used again in the right location.

During reassembly, take care when compressing the mainspring (hammer spring) and recoil spring, as both are extremely strong. If accidentally let go they could cause physical harm.