Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 43

Field Strip:

1. Remove magazine, and pull slide all the way to the rear, locking it open by pushing the safety up to the on-safe position.

2. With a small screwdriver or other tool of appropriate size, turn both of the locking piece support levers inward until they are clear of their recesses in the slide. The rear edge of the magazine bottom can be used for this, but there is a possibility the slide may be scratched, so use of a proper tool is advisable.

3. When both locking-piece support levers are in position for takedown, they will look like this, from the rear.

4. With a small screwdriver, a drift punch, or any other tool of appropriate size, depress the firing pin head and move the locking support piece downward.

5. Remove the locking-piece support piece from the bottom of the slide. There is a slight possibility that the firing pin may be released at this point, but in most cases it will remain in the breechblock. For safety, cover the area with your hand to prevent the firing pin from flying out of the slide.

6. Holding the slide against the recoil spring tension, release the safety and allow the slide to run slowly forward off the frame.

7. Lift the breechblock from its locking recess in the frame (actually, the recess is a part of the barrel extension, or sub-frame). Gun is now field-stripped.

Benelli B76 field-stripped