Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 41

Reassembly Tips:

1. When installing the safety lever, insert a tool at the top of the frame to slightly flex the end of the detent spring out of the way. Keep the smooth side of the cross-shaft next to the spring, and put no stress on the external lever.

2. For illustration purposes only, the sear and its spring are shown as they should be when reassembled.

3. Again, for illustration only, the secondary sear and its spring are shown as they should be when properly assembled in the frame.

4. When installing the hammer spring plunger, note that the “lip” on top goes toward the hammer, to engage inside the lobe on the back of the hammer. During hammer installation, the safety must be in off-safe mode. The hammer pivot must protrude slightly on the left side, as it acts as a stop for the safety lever.