Читать книгу The Gun Digest Book of Rimfire Rifles Assembly/Disassembly - J.B. Wood - Страница 15

Reassembly Tips:

1. When installing the cross pins in the trigger housing, remember that they have splined heads and must be inserted from right to left. Be sure the trigger spring plunger engages its shelf at the rear of the trigger before the pin is installed.

2. When replacing the bolt, remember that the striker must be positioned for insertion of the bolt handle. As the bolt is moved forward, insert a small drift in the hole in the sear trip, and tip it to the rear to disengage it from the sear. Directions for this are also embossed on the left side of the housing.

3. If the recoil and striker spring assemblies have been taken apart, here is a view of the proper arrangement for reassembly.