Читать книгу Workshop Projects - Jeff Jacobson - Страница 13
Flip Boards in a Panel Glue-Up for Tighter Joints
ОглавлениеYou can significantly improve the quality of a rubbed glue joint (two boards joined on edge) by putting a pencil mark on the top of each board and then running them through the jointer. Keep one board’s mark against the fence and the other’s mark away from it. Then, if the jointer is even the tiniest bit out of alignment, the two cuts will compensate each other. Turn one board end-for-end, apply glue, and press them together—this will spread the glue more evenly. Then, realign the boards correctly before clamping.
Material List – Workbench Cabinet
| T x W x L | ||
| 1 | Sides (2) | ¾" x 8¾" x 21⅝" |
| 2 | Top (1) | ¾" x 22⅜" x 47" |
| 3 | Bottom (1) | ¾" x 22⅜" x 47" |
| 4 | Back (1) | ¾" x 8¾" x 47" |
| 5 | Dividers (2) | ¾" x 8¾" x 21⅝" |
| 6 | Drawer Sides (6) | ¾" x 7" x 21¼" |
| 7 | Drawer Backs (3) | ¾" x 7" x 12⅞" |
| 8 | Drawer Fronts (3) | ¾" x 7" x 12⅞" |
| 9 | Drawer Faces (3) | ¾" x 8¼" x 15⅛" |
| 10 | Drawer Bottoms (3) | ¼" x 12¾" x 20¼" |
| 11 | Slides (3 Sets) | 20" Blum Side Mount |
| 12 | Knobs (3) | 1½" Dia. |
