Читать книгу Bolt Action Rifles - Wayne Zwoll - Страница 28

General Specifications

Type . . . . . . . . . . . .Turnbolt repeater.

Receiver . . . . . . . .One-piece machined steel forging with slotted main bridge. The forward part of the main bridge is built over to form a narrow bridge for the clip-charger guide.

Bolt . . . . . . . . . . . .Two-piece, with separate non-rotating bolt head. Dual-opposed locking lugs on the rear of the bolt.

Ignition . . . . . . . . . .One-piece firing pin powered by a coil mainspring. Cocks on closing bolt.

Magazine . . . . . . . .Detachable, staggered-column, ten-round box.

Trigger . . . . . . . . . .Non-adjustable double-stage military-type pull.

Safety . . . . . . . . . .Lever type at left rear of receiver, locks striker and bolt when swung back. Striker can also be placed in “half-cock” or “safe” position manually; see text.

Extractor . . . . . . . .Non-rotating hook type positioned in bolt head; separate spring.

Magazine cutoff . . .Cutoff provided on No. 1 Mark III, none on No. 4 or 5.

Bolt-stop . . . . . . . .No separate bolt-stop; extractor housing on bolt head acts as bolt-stop. See text.

Ejector . . . . . . . . . .Stud screw threaded into left receiver wall.

Stock fastening . . .Buttstock attached to receiver by a through-bolt.

All Lee-Enfield bolts have separate bolt heads, the bolt head threading into the bolt body. Shown here is a No. 4 bolt head, unscrewed from the bolt body.