Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 70

Reassembly Tips:

1. When replacing the slide on the frame, set it on top of the frame in the position shown, being sure that the exposed ends of the recoil spring are in their notches on the underside of the slide, and the rear sidewings of the slide are positioned to enter the slide tracks on the frame. Then push the slide down and toward the rear, snapping it into place, and flip the barrel back over to the normal firing position.

When replacing the safety-lever on the frame, remember that the hammer must be down and the safety in the off-safe position for reinsertion. Use a small screwdriver to depress the safety plunger, and take care that it doesn’t slip off, as the plunger is tiny and easily lost if it flies out.

When replacing the recoil spring, note that its internal loop must be positioned in front of the cross-shaft of the barrel release.

Remember that the hammer should be set on the safety step for easy reinsertion of the sear spring.