Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 72

Field Strip:

1. With the hammer cocked and the magazine removed, pull the slide back until the semcircular cut in its right lower edge aligns with the front of the takedown-lever, located just forward of the trigger on the right side.

2. While holding the slide in position, turn the takedown-lever forward and up. Run the slide assembly forward off the frame.

3. Lift the rear of the recoil spring guide from its step on the locking block and remove the guide and spring toward the rear.

4. Push the plunger at the rear of the barrel assembly to move the locking block from its recesses in the slide.

5. Move the barrel forward to clear the extractor, then remove the barrel downward from the slide. Gun is now field-stripped.

Beretta 951 field-stripped