Читать книгу Geophysical Monitoring for Geologic Carbon Storage - Группа авторов - Страница 15

Geodetic monitoring, including global positioning system (GPS) monitoring, tilt and Interferometric Synthetic Aperture Radar (InSAR), measures displacements and strains, both on the surface and within the interior of the Earth. Space‐based InSAR is perhaps the most cost‐effective geodetic technique for remote monitoring of land‐based geologic carbon storage sites.

CO₂ injection might cause Earth's surface to deform. Geodetic monitoring is a cost‐effective approach to monitoring reservoir integrity and detecting possible CO₂ leakage. The technique involves repeated measurements of the deformation of Earth's surface. In Chapter 2, Vasco et al. present a geodetic monitoring technique using InSAR. InSAR, which provides high spatial resolution and broad surface coverage, is particularly suitable for monitoring large‐scale geologic carbon storage. Multi‐temporal analysis can improve the accuracy of surface displacement measurements. Data interpretation and inversion techniques may be used to relate the observed surface displacements to the CO₂ injection‐induced volume change at depth. Some advantages of geodetic monitoring include: (1) observations are usually frequent in time, from every few minutes to every few months; (2) geodetic measurements are often conducted remotely, simplifying data collection and enabling cost‐effective monitoring; (3) geodetic observations are sensitive to fluid volume and pressure changes associated with geologic carbon storage; and (4) geodetic monitoring may be able to detect CO₂ leakage and the upward migration of fluid under pressure because the magnitude of surface displacement increases dramatically when the fluid‐injection‐induced deformation approaches the surface. InSAR monitoring has been successfully used at a gas storage site at In Salah, Algeria, where it has been determined that the flow in the reservoir was influenced by large‐scale fault/fracture zones. InSAR monitoring at the Aquistore CO₂ storage project in Canada and the Illinois Basin Decatur Project in the United States indicates no major surface deformation that might be attributed to stored carbon dioxide. InSAR can possibly monitor ground deformation with an accuracy of 0.5 cm. InSAR data quality may be compromised by diverse land surface environments and unfavorable site conditions, such as mining and construction activities, groundwater recharge, swelling clays, and slope instabilities.

Surface monitoring is used to detect CO₂ on the surface when some of the injected CO₂ migrates to the surface. Most surface monitoring techniques involve monitoring absolute changes in bulk CO₂ concentration, which is complicated by the diurnal cycle. In Chapter 3, Clegg et al. present a surface monitoring technique using frequency modulated spectroscopy, which uses changes in the carbon stable isotope ratio in CO₂ to distinguish anthropogenic and natural CO₂. Passive and active absorption spectroscopy can measure the absolute concentration of atmospheric CO₂ and derive seepage from the sequestration site using changes from the background diurnal concentrations. Absorption spectroscopy has the advantage of both point source in situ analysis and wide area remote analysis of the area above a geologic carbon storage site.