Читать книгу Animal Proteins - Hugh Garner Bennett - Страница 11

Table of Contents

Leather for the soles of boots and shoes is a matter of essential interest to all, and forms one of the best appreciated applications of animal proteids to useful purposes. Methods for its manufacture are as numerous as the factories producing it, hence all that can be done is to describe broadly the general method which is typical of our time, to classify the many varieties into types, and to indicate the recent changes and present tendencies.

Sole leather is mainly manufactured from butt pelt, and the great aim is to produce a firm, thick, waterproof and smooth grained leather which will bend without cracking. It must have a light tan colour to be saleable, and contain as much weight as possible to be profitable.

The modern mixed tannage of "sole butts" or "scoured bends" generally utilizes ox-hides of the Scotch and English markets, though salted Continentals and South Americans are also employed. After the usual soaking a short and sharp liming is given. The special aim in liming sole hides is to obtain the maximum plumping effect with the minimum loss of hide substance. Both these achievements are necessary to obtain good weight. The limes should be kept as clean as possible, which is best obtained by putting clean hides into work. This reduces bacterial activity and loss of hide substance. The "shortness" of the process is attained by the use of sodium sulphide (from 2 to 16 ozs. per hide of sulphide crystals), by which depilation may be accomplished easily in about nine days. The amount of sulphide should be increased somewhat in the short-hair season and in cold weather. Some factories take up to about 12 days using less sulphide, whilst others will lime in about a week by using the larger quantities. The amount of lime used varies enormously, and is invariably in great excess of the actual requirements. "Probably 2-3 per cent. on the green weight of the hides is all that can be really utilized, the remainder being wasted." [5] This amounts to about 2½ lbs. lime per hide, but in practice it is more frequent to find 7, 8, 9 or even 10 lbs. per hide being used. The excess is innocuous, owing to the limited solubility of lime. Some excess is desirable, to replace in the liquor the lime adsorbed by the goods in plumping, to assist bacterial activity (p. 21), and also because in sharp lime liquors the undissolved portions do not remain so long in suspension. The use of sulphide and other alkalies does not "make it possible" to reduce the amount of lime used, it merely renders the excess more superfluous. The use of sulphide not only shortens the process, but also sharpens it, on account of the caustic soda produced by hydrolysis. Usually for sole leather, however, it hardly sharpens it sufficiently, and it is very common to add also caustic soda (or carbonate of soda) to the limes. About 2 ozs. caustic soda (or its equivalent in carbonate) is used per hide. The hides are limed generally by the three-pit system, giving about three days in each pit. They should be handled each day in the first pit (old lime) and once in the other pits.