Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 45

Reassembly Tips:

1. When replacing the sub-frame unit in the grip frame, cock the hammer, setting the sear in place (forward) by hand. Push the trigger bar down to disengage it from the sear, and pull trigger all the way to the rear, holding it there. Insert the hammer spring assembly into the grip frame, being sure that the sear spring engages properly behind the sear. Press the sub-frame down at the rear, then at the front, fitting it to its steps in the grip frame. Make final adjustments by tapping it gently into place with a nylon or plastic hammer, but use no extreme force.

Although the barrel is removable by unscrewing with a metric wrench of the proper size, taking it out of the sub-frame is not advisable. If it has been removed, take care that it is turned back into the proper depth, precisely aligning the extractor recess at the top with the matching recess in the barrel block on the sub-frame.

When replacing the slide latch, cock the hammer to clear the trigger top from the slide latch tunnel in the frame.

2. To insure that the sear spring properly engages the sear, insert a small tool through the safety-lever opening in the grip frame, and pry the spring slightly toward the rear while pushing the sub-frame into place.