Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 53

Reassembly Tips:

1. The trigger, trigger spring, trigger bar, slide latch, and takedown release are shown in the positions they occupy in the frame. When installing the trigger bar, be sure the rear arm of the trigger spring is lifted to bear on the internal pivot of the bar. Also, be sure the forward tip of the trigger spring enters its hole in the takedown release. Unfortunately, the parts cannot be pre-assembled as shown. They must be put into the frame separately.

When replacing the left safety-lever on the frame, use a small screwdriver to depress the spring and plunger until they can bear on the post. Take care that they don’t escape.

When replacing the magazine catch, put the left end back into the recess, with the inner shoulder of the left spring block bearing on its recess in the frame. Push the catch toward the left, compressing the spring, and swing the right left-handed operation, reverse the direction of the catch, and install it from the opposite side.