Читать книгу Automatic Pistols Assembly/Disassembly - J B Wood - Страница 62

Reassembly Tips:

When replacing the trigger bar, insert a tool from the top of the frame to lift the rear arm of the trigger spring, hooking it over the inward projection of the bar.

When replacing the slide latch, remember that the rear arm of its spring must be lifted into its recess on the inner projection of the latch.

When replacing the firing pin and extractor, use a slave pin to hold these parts in place while driving in the retaining pin.

When replacing the safety in the slide, be sure that the flat of its back edge is aligned with the slant of the safety recess in the slide, and that the firing pin impeller is centered in the cross-piece of the safety. When everything is aligned, it can be pushed straight into the slide. When the right end of the safety reaches the lock plunger on the right side, the plunger must be depressed to pass under the end of the safety. When the safety is all the way in, it can be turned back down to normal position.