Читать книгу The Gun Digest Book of Rimfire Rifles Assembly/Disassembly - J.B. Wood - Страница 27

Reassembly Tips:

1. When replacing the striker in the bolt, note that the striker has a guide lug on its left side that mates with a track inside the bolt.

2. When replacing the bolt in the trigger group, carefully compress the recoil spring on its guide, then use a fingertip to hold the spring and guide in place on the bolt while fitting the bolt into place, inserting the tip of the striker spring guide into its hole in the vertical extension. Then, fit the rear bracket of the bolt spring guide onto its lug on the extension. Caution: While the bolt spring is compressed, keep it aimed away from your eyes, in case the finger should slip.

3. When reassembling the takedown latch system, be sure the small wedge-tipped plunger on the underside of the latch is oriented so the wedge tip aligns with the serrations on the adjustment nut. Use a small screwdriver to depress the two plungers alternately as the latch is moved into place.

4. To readjust the barrel nut, install the barrel on the gun before replacing the forend, lock the takedown latch in place, and turn the knurled adjustment nut until the ring is snug against the receiver. Then, reinstall the forend.