Читать книгу The Gun Digest Book of Rimfire Rifles Assembly/Disassembly - J.B. Wood - Страница 36

Reassembly Tips:

When replacing the bolt and bolt spring assembly in the receiver, be sure the two springs are completely seated on the guide, and that the guide is horizontally oriented so the springs will not kink.

Before replacing the trigger in the receiver, swing the inside arm of the mainspring up to the rear and rest it on the inside of the receiver. When the trigger is in place, use a small screwdriver to lift the inner arm of the spring while inserting the spring base pin. Be sure the tip of the spring engages the groove in the pin.

1. When replacing the rear sight, note that the position of the sight plate is adjustable, and any change will affect the point of impact.

2. When replacing the sideplate, be sure the small tip of the hammer pivot is aligned with its hole in the sideplate.

3. When replacing the barrel, be sure the guide key on the top of the barrel enters its slot in the front of the receiver. Tighten the barrel collar firmly, by hand, but do not over-tighten, as both collar and receiver are made of alloy.