Читать книгу The Gun Digest Book of Rimfire Rifles Assembly/Disassembly - J.B. Wood - Страница 42

Reassembly Tips:

1. When installing the hammer and trigger, be sure the lower end of the hammer is inside the top of the trigger, to ensure that the nylon bushings are not dislodged. When inserting the pin, take care that the bushings are not damaged. When the hammer spring is moved back into place, use pliers to fit the spring loops back onto the ends of the cross pin on each side.

2. When positioning the sear for insertion of the cross pin, use a tool to depress and hold the sear plunger and spring. This is best done with the trigger group held gently in a padded vise.

3. This view shows all of the trigger group parts in their proper positions. Remember to place the bolt on top before reinsertion into the receiver. As the group is moved upward into place, use a tool at the center of the cocking handle assembly, inside, to push it back slightly for re-engagement with the bolt recess. Do not use the bolt handle for this.