Читать книгу The Gun Digest Book of Rimfire Rifles Assembly/Disassembly - J.B. Wood - Страница 33

Reassembly Tips:

1. When installing the firing pin in the bolt, be sure it is oriented properly, as shown.

2. When attaching the bolt handle plate, be sure its rear lug engages the firing pin return spring.

3. When the bolt assembly is put back into the lower receiver, be sure the buffer is oriented properly to engage the tail of the ejector and the rear tip of the recoil spring unit.

4. As the bolt is installed, be sure the ejector is hooked into its recess at the rear, and push it forward as the upper receiver is tipped back into place. Also, draw the bolt back slightly to clear the extractor.

5. If the stock has been removed, drift the retaining pin down until its tip is level with the exterior of the stock piece, as shown.